Chapter 16: Equilibria of Other Reaction Classes

  1. Complete the changes in concentrations for each of the following reactions:
    1. [latex]\begin{array}{ccc}{\text{BaSO}}_{4}\left(s\right)\longrightarrow & {\text{Ba}}^{\text{2+}}\left(aq\right)+& {\text{SO}}_{4}{}^{2-}\left(aq\right)\\ & x& \text{_____}\end{array}[/latex]
    2. [latex]\begin{array}{ccc}{\text{Ag}}_{2}{\text{SO}}_{4}\left(s\right)\longrightarrow & 2{\text{Ag}}^{\text{+}}\left(aq\right)+& {\text{SO}}_{4}^{2-}\left(aq\right)\\ & \text{_____}& x\end{array}[/latex]
    3. [latex]\begin{array}{ccc}\text{Al}{\left(\text{OH}\right)}_{3}\left(s\right)\longrightarrow & {\text{Al}}^{\text{3+}}\left(aq\right)+& 3{\text{OH}}^{-}\left(aq\right)\\ & x& \text{_____}\end{array}[/latex]
    4. [latex]\begin{array}{cccc}\text{Pb}\left(\text{OH}\right)\text{Cl}\left(s\right)\longrightarrow & {\text{Pb}}^{\text{2+}}\left(aq\right)+& {\text{OH}}^{-}\left(aq\right)+& {\text{Cl}}^{-}\left(aq\right)\\ & \text{_____}\text{}& x& \text{_____}\end{array}[/latex]
    5. [latex]\begin{array}{ccc}{\text{Ca}}_{3}{\left({\text{AsO}}_{4}\right)}_{2}\left(s\right)\longrightarrow & 3{\text{Ca}}^{\text{2+}}\left(aq\right)+& 2{\text{AsO}}_{4}^{3-}\left(aq\right)\\ & 3x& \text{_____}\end{array}[/latex]
  2. How do the concentrations of [latex]\ce{Pb^2+}[/latex] and [latex]\ce{S2-}[/latex] change when [latex]\ce{K2S}[/latex] is added to a saturated solution of [latex]\ce{PbS}[/latex]?
  3. What additional information do we need to answer the following question: How is the equilibrium of solid silver bromide with a saturated solution of its ions affected when the temperature is raised?
  4. Which of the following slightly soluble compounds has a solubility greater than that calculated from its solubility product because of hydrolysis of the anion present: [latex]\ce{CoSO3}[/latex], [latex]\ce{CuI}[/latex], [latex]\ce{PbCO3}[/latex], [latex]\ce{PbCl2}[/latex], [latex]\ce{Tl2S}[/latex], [latex]\ce{KClO4}[/latex]?
  5. Which of the following slightly soluble compounds has a solubility greater than that calculated from its solubility product because of hydrolysis of the anion present: [latex]\ce{AgCl}[/latex], [latex]\ce{BaSO4}[/latex], [latex]\ce{CaF2}[/latex], [latex]\ce{Hg2I2}[/latex], [latex]\ce{MnCO3}[/latex], [latex]\ce{ZnS}[/latex], [latex]\ce{PbS}[/latex]?
  6. Write the ionic equation for dissolution and the solubility product (Ksp) expression for each of the following slightly soluble ionic compounds:
    1. [latex]\ce{PbCl2}[/latex]
    2. [latex]\ce{Ag2S}[/latex]
    3. [latex]\ce{Sr3(PO4)2}[/latex]
    4. [latex]\ce{SrSO4}[/latex]
  7. Write the ionic equation for the dissolution and the Ksp expression for each of the following slightly soluble ionic compounds:
    1. [latex]\ce{LaF3}[/latex]
    2. [latex]\ce{CaCO3}[/latex]
    3. [latex]\ce{Ag2SO4}[/latex]
    4. [latex]\ce{Pb(OH)2}[/latex]
  8. The Handbook of Chemistry and Physics gives solubilities of the following compounds in grams per 100 mL of water. Because these compounds are only slightly soluble, assume that the volume does not change on dissolution and calculate the solubility product for each.
    1. [latex]\ce{BaSeO4}[/latex], 0.0118 g/100 mL
    2. [latex]\ce{Ba(BrO3)2·H2O}[/latex], 0.30 g/100 mL
    3. [latex]\ce{NH4MgAsO4·6H2O}[/latex], 0.038 g/100 mL
    4. [latex]\ce{La2(MoO4)2}[/latex], 0.00179 g/100 mL
  9. Use solubility products and predict which of the following salts is the most soluble, in terms of moles per liter, in pure water: [latex]\ce{CaF2}[/latex], [latex]\ce{Hg2Cl2}[/latex], [latex]\ce{PbI2}[/latex], or [latex]\ce{Sn(OH)2}[/latex].
  10. Assuming that no equilibria other than dissolution are involved, calculate the molar solubility of each of the following from its solubility product:
    1. [latex]\ce{KHC4H4O6}[/latex]
    2. [latex]\ce{PbI2}[/latex]
    3. [latex]\ce{Ag4[Fe(CN)6]}[/latex], a salt containing the [latex]{\text{Fe(CN)}}_{4}^{-}[/latex] ion.
    4. [latex]\ce{Hg2I2}[/latex]
  11. Assuming that no equilibria other than dissolution are involved, calculate the molar solubility of each of the following from its solubility product:
    1. [latex]\ce{Ag2SO4}[/latex]
    2. [latex]\ce{PbBr2}[/latex]
    3. [latex]\ce{AgI}[/latex]
    4. [latex]\ce{CaC2O4·H2O}[/latex]
  12. Assuming that no equilibria other than dissolution are involved, calculate the concentration of all solute species in each of the following solutions of salts in contact with a solution containing a common ion. Show that changes in the initial concentrations of the common ions can be neglected.
    1. [latex]\ce{AgCl}[/latex](s) in 0.025 M NaCl
    2. [latex]\ce{CaF2}[/latex](s) in 0.00133 M KF
    3. [latex]\ce{Ag2SO4}[/latex](s) in 0.500 L of a solution containing 19.50 g of [latex]\ce{K2SO4}[/latex]
    4. [latex]\ce{Zn(OH)2}[/latex](s) in a solution buffered at a pH of 11.45
  13. Assuming that no equilibria other than dissolution are involved, calculate the concentration of all solute species in each of the following solutions of salts in contact with a solution containing a common ion. Show that changes in the initial concentrations of the common ions can be neglected.
    1. [latex]\ce{TlCl}[/latex](s) in 1.250 M [latex]\ce{HCl}[/latex]
    2. [latex]\ce{PbI2}[/latex](s) in 0.0355 M [latex]\ce{CaI2}[/latex]
    3. [latex]\ce{Ag2CrO4}[/latex](s) in 0.225 L of a solution containing 0.856 g of [latex]\ce{K2CrO4}[/latex]
    4. [latex]\ce{Cd(OH)2}[/latex](s) in a solution buffered at a pH of 10.995
  14. Assuming that no equilibria other than dissolution are involved, calculate the concentration of all solute species in each of the following solutions of salts in contact with a solution containing a common ion. Show that it is not appropriate to neglect the changes in the initial concentrations of the common ions.
    1. [latex]\ce{TlCl}[/latex](s) in 0.025 M [latex]\ce{TlNO3}[/latex]
    2. [latex]\ce{BaF2}[/latex](s) in 0.0313 M [latex]\ce{KF}[/latex]
    3. [latex]\ce{MgC2O4}[/latex] in 2.250 L of a solution containing 8.156 g of [latex]\ce{Mg(NO3)2}[/latex]
    4. [latex]\ce{Ca(OH)2}[/latex](s) in an unbuffered solution initially with a pH of 12.700
  15. Explain why the changes in concentrations of the common ions in Question 17 can be neglected.
  16. Explain why the changes in concentrations of the common ions in Question 18 cannot be neglected.
  17. Calculate the solubility of aluminum hydroxide, [latex]\ce{Al(OH)3}[/latex], in a solution buffered at pH 11.00.
  18. Refer to Solubility Products for solubility products for calcium salts. Determine which of the calcium salts listed is most soluble in moles per liter and which is most soluble in grams per liter.
  19. Most barium compounds are very poisonous; however, barium sulfate is often administered internally as an aid in the X-ray examination of the lower intestinal tract (Figure 16.1.3). This use of BaSO4 is possible because of its low solubility. Calculate the molar solubility of [latex]\ce{BaSO4}[/latex] and the mass of barium present in 1.00 L of water saturated with [latex]\ce{BaSO4}[/latex].
  20. Public Health Service standards for drinking water set a maximum of 250 mg/L (2.60 × 10–3 M) of [latex]{\text{SO}}_{4}^{2-}[/latex] because of its cathartic action (it is a laxative). Does natural water that is saturated with CaSO4 (“gyp” water) as a result or passing through soil containing gypsum, [latex]\ce{CaSO4}\cdot \ce{2H2O}[/latex], meet these standards? What is [latex]{\text{SO}}_{4}^{2-}[/latex] in such water?
  21. Perform the following calculations:
    1. Calculate [latex]\ce{[Ag+]}[/latex] in a saturated aqueous solution of [latex]\ce{AgBr}[/latex].
    2. What will [latex]\ce{[Ag+]}[/latex] be when enough [latex]\ce{KBr}[/latex] has been added to make [latex]\ce{[Br-]}[/latex] = 0.050 M?
    3. What will [latex]\ce{[Br-]}[/latex] be when enough [latex]\ce{AgNO3}[/latex] has been added to make [latex]\ce{[Ag+]}[/latex] = 0.020 M?
  22. The solubility product of [latex]\ce{CaSO4·2H2O}[/latex] is 2.4 × 10–5. What mass of this salt will dissolve in 1.0 L of 0.010 M [latex]{\text{SO}}_{4}^{2-}?[/latex]
  23. Assuming that no equilibria other than dissolution are involved, calculate the concentrations of ions in a saturated solution of each of the following (see Solubility Products).
    1. [latex]\ce{TlCl}[/latex]
    2. [latex]\ce{BaF2}[/latex]
    3. [latex]\ce{Ag2CrO4}[/latex]
    4. [latex]\ce{CaC2O4·H2O}[/latex]
    5. the mineral anglesite, [latex]\ce{PbSO4}[/latex]
  24. The following concentrations are found in mixtures of ions in equilibrium with slightly soluble solids. From the concentrations given, calculate Ksp for each of the slightly soluble solids indicated:
    1. [latex]\ce{AgBr: [Ag+]}[/latex] = 5.7 × 10–7M, [Br] = 5.7 × 10–7M
    2. [latex]\ce{CaCO3: [Ca^2+]}[/latex] = 5.3 × 10–3M, [latex]\left[\text{CO}_{3}^{2-}\right][/latex] = 9.0 × 10–7M
    3. [latex]\ce{PbF2: [Pb^2+]}[/latex] = 2.1 × 10–3M, [F] = 4.2 × 10–3M
    4. [latex]\ce{Ag2CrO4: [Ag+]}[/latex] = 5.3 × 10–5M, 3.2 × 10–3M
    5. [latex]\ce{InF3: [In^3+]}[/latex] = 2.3 × 10–3M, [F] = 7.0 × 10–3M
  25. The following concentrations are found in mixtures of ions in equilibrium with slightly soluble solids. From the concentrations given, calculate Ksp for each of the slightly soluble solids indicated:
    1. [latex]\ce{TlCl: [Tl+]}[/latex] = 1.21 × 10–2M, [Cl] = 1.2 × 10–2M
    2. [latex]\ce{Ce(IO3)4: [Ce^4+]}[/latex] = 1.8 × 10–4M, [latex]\left[\text{IO}_{3}^{-}\right][/latex] = 2.6 × 10–13M
    3. [latex]\ce{Gd2(SO4)3: [Gd^3+]}[/latex] = 0.132 M, [latex]\left[\text{SO}_{4}^{2-}\right][/latex] = 0.198 M
    4. [latex]\ce{Ag2SO4: [Ag+]}[/latex] = 2.40 × 10–2M, [latex]\left[{\text{SO}}_{4}^{2-}\right][/latex] = 2.05 × 10–2M
    5. [latex]\ce{BaSO4: [Ba^2+]}[/latex] = 0.500 M, [latex]\left[{\text{SO}}_{4}^{2-}\right][/latex] = 2.16 × 10–10M
  26. Which of the following compounds precipitates from a solution that has the concentrations indicated? (See Solubility Products for Ksp values.)
    1. [latex]\ce{KClO4: [K+]}[/latex] = 0.01 M, [latex]\left[{\text{ClO}}_{4}^{-}\right][/latex] = 0.01 M
    2. [latex]\ce{K2PtCl6: [K+]}[/latex] = 0.01 M, [latex]{\text{[PtCl}}_{6}^{2-}][/latex] = 0.01 M
    3. [latex]\ce{PbI2: [Pb^2+]}[/latex] = 0.003 M, [I] = 1.3 × 10–3M
    4. [latex]\ce{Ag2S: [Ag+]}[/latex] = 1 × 10–10M, [S2–] = 1 × 10–13M
  27. Which of the following compounds precipitates from a solution that has the concentrations indicated? (See Solubility Products for Ksp values.)
    1. [latex]\ce{CaCO3: [Ca^2+]}[/latex] = 0.003 M, [latex]{\text{[CO}}_{3}^{2-}][/latex] = 0.003 M
    2. [latex]\ce{Co(OH)2: [Co^2+]}[/latex] = 0.01 M, [OH] = 1 × 10–7M
    3. [latex]\ce{CaHPO4: [Ca^2+]}[/latex] = 0.01 M, [latex]{\text{[HPO}}_{4}^{2-}][/latex] = 2 × 10–6M
    4. [latex]\ce{Pb3(PO4)2: [Pb^2+]}[/latex] = 0.01 M, [latex]{\text{[PO}}_{4}^{3-}][/latex] 1 × 10–13M
  28. Calculate the concentration of [latex]\ce{Tl+}[/latex] when [latex]\ce{TlCl}[/latex] just begins to precipitate from a solution that is 0.0250 M in [latex]\ce{Cl-}[/latex].
  29. Calculate the concentration of sulfate ion when [latex]\ce{BaSO4}[/latex] just begins to precipitate from a solution that is 0.0758 M in [latex]\ce{Ba^2+}[/latex].
  30. Calculate the concentration of [latex]\ce{Sr^2+}[/latex] when [latex]\ce{SrF2}[/latex] starts to precipitate from a solution that is 0.0025 M in [latex]\ce{F-}[/latex].
  31. Calculate the concentration of [latex]{\text{PO}}_{4}^{3-}[/latex] when [latex]\ce{Ag3PO4}[/latex] starts to precipitate from a solution that is 0.0125 M in [latex]\ce{Ag+}[/latex].
  32. Calculate the concentration of [latex]\ce{F-}[/latex] required to begin precipitation of [latex]\ce{CaF2}[/latex] in a solution that is 0.010 M in [latex]\ce{Ca^2+}[/latex].
  33. Calculate the concentration of [latex]\ce{Ag+}[/latex] required to begin precipitation of [latex]\ce{Ag2CO3}[/latex] in a solution that is 2.50 × 10–6M in [latex]{\text{CO}}_{3}^{2-}[/latex].
  34. What [latex]\ce{[Ag+]}[/latex] is required to reduce [latex]\ce{[CO3^2-]}[/latex] to 8.2 × 10–4M by precipitation of [latex]\ce{Ag2CO3}[/latex]?
  35. What [latex]\ce{[F-]}[/latex] is required to reduce [latex]\ce{[Ca^2+]}[/latex] to 1.0 × 10–4M by precipitation of [latex]\ce{CaF2}[/latex]?
  36. A volume of 0.800 L of a 2 × 10–4M [latex]\ce{Ba(NO3)2}[/latex] solution is added to 0.200 L of 5 × 10–4M [latex]\ce{Li2SO4}[/latex]. Does [latex]\ce{BaSO4}[/latex] precipitate? Explain your answer.
  37. Perform these calculations for nickel(II) carbonate.
    1. With what volume of water must a precipitate containing [latex]\ce{NiCO3}[/latex] be washed to dissolve 0.100 g of this compound? Assume that the wash water becomes saturated with [latex]\ce{NiCO3}[/latex] (Ksp = 1.36 × 10–7).
    2. If the [latex]\ce{NiCO3}[/latex] were a contaminant in a sample of CoCO3 (Ksp = 1.0 × 10–12), what mass of [latex]\ce{CoCO3}[/latex] would have been lost? Keep in mind that both [latex]\ce{NiCO3}[/latex] and [latex]\ce{CoCO3}[/latex] dissolve in the same solution.
  38. Iron concentrations greater than 5.4 × 10–6M in water used for laundry purposes can cause staining. What [latex]\ce{[OH-]}[/latex] is required to reduce [latex]\ce{[Fe^2+]}[/latex] to this level by precipitation of [latex]\ce{Fe(OH)2}[/latex]?
  39. A solution is 0.010 M in both [latex]\ce{Cu^2+}[/latex] and [latex]\ce{Cd^2+}[/latex]. What percentage of [latex]\ce{Cd^2+}[/latex] remains in the solution when 99.9% of the [latex]\ce{Cu^2+}[/latex] has been precipitated as [latex]\ce{CuS}[/latex] by adding sulfide?
  40. A solution is 0.15 M in both [latex]\ce{Pb^2+}[/latex] and [latex]\ce{Ag+}[/latex]. If [latex]\ce{Cl-}[/latex] is added to this solution, what is [latex]\ce{[Ag+]}[/latex] when [latex]\ce{PbCl2}[/latex] begins to precipitate?
  41. What reagent might be used to separate the ions in each of the following mixtures, which are 0.1 M with respect to each ion? In some cases it may be necessary to control the [latex]\ce{pH}[/latex]. (Hint: Consider the Ksp values given in Solubility Products.)
    1. [latex]{\text{Hg}}_{2}^{2+}[/latex] and [latex]\ce{Cu^2+}[/latex]
    2. [latex]{\text{SO}}_{4}^{2-}[/latex] and [latex]\ce{Cl-}[/latex]
    3. [latex]\ce{Hg^2+}[/latex] and [latex]\ce{Co^2+}[/latex]
    4. [latex]\ce{Zn^2+}[/latex] and [latex]\ce{Sr^2+}[/latex]
    5. [latex]\ce{Ba^2+}[/latex] and [latex]\ce{Mg^2+}[/latex]
    6. [latex]{\text{CO}}_{3}^{2-}[/latex] and [latex]\ce{OH-}[/latex]
  42. A solution contains 1.0 × 10–5 mol of [latex]\ce{KBr}[/latex] and 0.10 mol of [latex]\ce{KCl}[/latex] per liter. [latex]\ce{AgNO3}[/latex] is gradually added to this solution. Which forms first, solid [latex]\ce{AgBr}[/latex] or solid [latex]\ce{AgCl}[/latex]?
  43. A solution contains 1.0 × 10–2 mol of [latex]\ce{KI}[/latex] and 0.10 mol of [latex]\ce{KCl}[/latex] per liter. [latex]\ce{AgNO3}[/latex] is gradually added to this solution. Which forms first, solid AgI or solid [latex]\ce{AgCl}[/latex]?
  44. The calcium ions in human blood serum are necessary for coagulation (Figure 16.1.4). Potassium oxalate, [latex]\ce{K2C2O4}[/latex], is used as an anticoagulant when a blood sample is drawn for laboratory tests because it removes the calcium as a precipitate of [latex]\ce{CaC2O4·H2O}[/latex]. It is necessary to remove all but 1.0% of the [latex]\ce{Ca^2+}[/latex] in serum in order to prevent coagulation. If normal blood serum with a buffered pH of 7.40 contains 9.5 mg of [latex]\ce{Ca^2+}[/latex] per 100 mL of serum, what mass of [latex]\ce{K2C2O4}[/latex] is required to prevent the coagulation of a 10 mL blood sample that is 55% serum by volume? (All volumes are accurate to two significant figures. Note that the volume of serum in a 10-mL blood sample is 5.5 mL. Assume that the Ksp value for [latex]\ce{CaC2O4}[/latex] in serum is the same as in water.)
  45. About 50% of urinary calculi (kidney stones) consist of calcium phosphate, [latex]\ce{Ca3(PO4)2}[/latex]. The normal mid range calcium content excreted in the urine is 0.10 g of [latex]\ce{Ca^2+}[/latex] per day. The normal mid range amount of urine passed may be taken as 1.4 L per day. What is the maximum concentration of phosphate ion that urine can contain before a calculus begins to form?
  46. The pH of normal urine is 6.30, and the total phosphate concentration [latex]\left(\left[\text{PO}_{4}^{3-}\right]+\left[{\text{HPO}}_{4}^{2-}\right]+\left[{\text{H}}_{2}{\text{PO}}_{4}^{-}\right]+\left[\text{H}_3\text{PO}_4\right]\right)[/latex] is 0.020 M. What is the minimum concentration of [latex]\ce{Ca^2+}[/latex] necessary to induce kidney stone formation? (See Question 49 for additional information.)
  47. Magnesium metal (a component of alloys used in aircraft and a reducing agent used in the production of uranium, titanium, and other active metals) is isolated from sea water by the following sequence of reactions: [latex]{\text{Mg}}^{\text{2+}}\left(aq\right)+{\text{Ca(OH)}}_{2}\left(aq\right)\longrightarrow {\text{Mg(OH)}}_{2}\left(s\right)+{\text{Ca}}^{\text{2+}}\left(aq\right)[/latex][latex]{\text{Mg(OH)}}_{2}\left(s\right)+\text{2HCl}(aq)\longrightarrow {\text{MgCl}}_{2}\left(s\right)+{\text{2H}}_{2}\text{O}\left(l\right)[/latex]
    [latex]{\text{MgCl}}_{2}\left(l\right)\stackrel{\text{electrolysis}}{\longrightarrow }\text{Mg}\left(s\right)+{\text{Cl}}_{2}\left(g\right)[/latex]Sea water has a density of 1.026 g/cm3 and contains 1272 parts per million of magnesium as [latex]\ce{Mg^2+}[/latex](aq) by mass. What mass, in kilograms, of [latex]\ce{Ca(OH)2}[/latex] is required to precipitate 99.9% of the magnesium in 1.00 × 103 L of sea water?
  48. Hydrogen sulfide is bubbled into a solution that is 0.10 M in both [latex]\ce{Pb^2+}[/latex] and [latex]\ce{Fe^2+}[/latex] and 0.30 M in [latex]\ce{HCl}[/latex]. After the solution has come to equilibrium it is saturated with [latex]\ce{H2S}[/latex] ([latex]\ce{[H2S]}[/latex] = 0.10 M). What concentrations of [latex]\ce{Pb^2+}[/latex] and [latex]\ce{Fe^2+}[/latex] remain in the solution? For a saturated solution of H2S we can use the equilibrium:[latex]{\text{H}}_{2}\text{S}\left(aq\right)+{\text{2H}}_{2}\text{O}\left(l\right)\rightleftharpoons {\text{2H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{S}}^{2-}\left(aq\right)K=1.0\times 1{0}^{-26}[/latex](Hint: The [latex]\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right][/latex] changes as metal sulfides precipitate.)
  49. Perform the following calculations involving concentrations of iodate ions:
    1. The iodate ion concentration of a saturated solution of [latex]\ce{La(IO3)3}[/latex] was found to be 3.1 × 10–3 mol/L. Find the Ksp.
    2. Find the concentration of iodate ions in a saturated solution of [latex]\ce{Cu(IO3)2}[/latex] (Ksp = 7.4 × 10–8).
  50. Calculate the molar solubility of [latex]\ce{AgBr}[/latex] in 0.035 M [latex]\ce{NaBr}[/latex] (Ksp = 5 × 10–13).
  51. How many grams of [latex]\ce{Pb(OH)2}[/latex] will dissolve in 500 mL of a 0.050-M [latex]\ce{PbCl2}[/latex] solution (Ksp = 1.2 × 10–15)?
  52. Use this simulation to study the process of salts dissolving and forming saturated solutions to complete the following exercise. Using 0.01 g [latex]\ce{CaF2}[/latex], give the Ksp values found in a 0.2-M solution of each of the salts. Discuss why the values change as you change soluble salts.
  53. How many grams of Milk of Magnesia, [latex]\ce{Mg(OH)2}[/latex] (s) (58.3 g/mol), would be soluble in 200 mL of water. Ksp = 7.1 × 10–12. Include the ionic reaction and the expression for Ksp in your answer. What is the pH? (Kw = 1 × 10–14 = [latex]\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right][/latex] [latex]\ce{[OH-]}[/latex])
  54. Two hypothetical salts, LM2 and LQ, have the same molar solubility in [latex]\ce{H2O}[/latex]. If Ksp for LM2 is 3.20 × 10–5, what is the Ksp value for LQ?
  55. Which of the following carbonates will form first? Which of the following will form last? Explain.
    1. [latex]{\text{MgCO}}_{3}{K}_{\text{sp}}=3.5\times 1{0}^{-8}[/latex]
    2. [latex]{\text{CaCO}}_{3}{K}_{\text{sp}}=4.2\times 1{0}^{-7}[/latex]
    3. [latex]{\text{SrCO}}_{3}{K}_{\text{sp}}=3.9\times 1{0}^{-9}[/latex]
    4. [latex]{\text{BaCO}}_{3}{K}_{\text{sp}}=4.4\times 1{0}^{-5}[/latex]
    5. [latex]{\text{MnCO}}_{3}{K}_{\text{sp}}=5.1\times 1{0}^{-9}[/latex]
  56. How many grams of [latex]\ce{Zn(CN)2}[/latex](s) (117.44 g/mol) would be soluble in 100 mL of [latex]\ce{H2O}[/latex]? Include the balanced reaction and the expression for Ksp in your answer. The Ksp value for Zn(CN)2(s) is 3.0 × 10–16.

[reveal-answer q=”71248″]Show Selected Solutions[/reveal-answer]
[hidden-answer a=”71248″]

  1. There is no change. A solid has an activity of 1 whether there is a little or a lot.
  2. The solubility of silver bromide at the new temperature must be known. Normally the solubility increases and some of the solid silver bromide will dissolve.
  3. [latex]\ce{CaF2}[/latex], [latex]\ce{MnCO3}[/latex], and [latex]\ce{ZnS}[/latex]; each is a salt of a weak acid and the hydronium ion from water reacts with the anion, causing more solid to dissolve to maintain the equilibrium concentration of the anion
  4. The answers for each compound are as follows:
    1. [latex]\text{LaF}_{3}\left(s\right)\rightleftharpoons\text{La}^{3+}\left(aq\right)+{3F}^{-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{sp}}=\left[\text{La}^{3+}\right]\left[\text{F}^{-}\right]^{3}[/latex]
    2. [latex]\text{CaCO}_{3}\left(s\right)\rightleftharpoons\text{Ca}^{2+}\left(aq\right)+\text{CO}_{3}^{2-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{sp}}=\left[\text{Ca}^{2+}\right]\left[\text{CO}_{3}^{2-}\right][/latex]
    3. [latex]\text{Ag}_{2}\text{SO}_{4}\left(s\right)\rightleftharpoons2\text{Ag}^{+}\left(aq\right)+\text{SO}_{4}^{2-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{sp}}=\left[\text{Ag}^{+}\right]^{2}\left[\text{SO}_{4}^{2-}\right][/latex]
    4. [latex]\text{Pb}\left(\text{OH}\right)_{2}\left(s\right)\rightleftharpoons\text{Pb}^{2+}\left(aq\right)+2\text{OH}^{-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{sp}}=\left[\text{Pb}^{2+}\right]\left[\text{OH}^{-}\right]^{2}[/latex]
  5. Convert each concentration into molar units. Multiply each concentration by 10 to determine the mass in 1 L, and then divide the molar mass.
    1. [latex]\ce{BaSeO4}[/latex]
      1. [latex]\frac{0.{\text{118 g L}}^{-1}}{280.{\text{28 g mol}}^{-1}}=\text{4.21}\times {10}^{-4}\text{}M[/latex]
      2. K = [Ba2+] [latex]\left[{\text{SeO}}_{4}^{2-}\right][/latex] = (4.21 × 10–4)(4.21 × 10–4) = 1.77 × 10–7
    2. [latex]\ce{Ba(BrO3)2·H2O}[/latex]:
      1. [latex]\frac{3.0{\text{g L}}^{-1}}{{\text{411.147 g mol}}^{-1}}=\text{7.3}\times {10}^{-3}\text{}M[/latex]
      2. K = [Ba2+] [latex]{\left[{\text{BrO}}_{3}{}^{-}\right]}^{2}[/latex] = (7.3 × 10–3)(2 × 7.3 × 10–3)2 = 1.6 × 10–6
    3. [latex]\ce{NH4MgAsO4·6H2O}[/latex]:
      1. [latex]\frac{0.{\text{38 g L}}^{-1}}{{\text{289.3544 g mol}}^{-1}}=\text{1.3}\times {10}^{-3}\text{}M[/latex]
      2. K = [latex]\left[{\text{NH}}_{4}{}^{\text{+}}\right][/latex] [Mg2+] [latex]\left[{\text{AsO}}_{4}{}^{3-}\right][/latex] = (1.3 × 10–3)3 = 2.2 × 10–9
    4. La2(MoO4)3:
      1. [latex]\frac{0.0{\text{179 g L}}^{-1}}{{\text{757.62 g mol}}^{-1}}=\text{2.36}\times {10}^{-5}\text{}M[/latex]
      2. K = [La3+]2 [latex]{\left[{\text{MoO}}_{4}{}^{2-}\right]}^{3}[/latex] = (2 × 2.36 × 10–5)2(3 × 2.36 × 10–5)3 = 2.228 × 10–9 × 3.549 × 10–13 = 7.91 × 10–22
  6. Let x be the molar solubility.
    1. Ksp = [latex]\left[{\text{K}}^{\text{+}}\right]\left[{\text{HC}}_{4}{\text{H}}_{4}{\text{O}}_{6}^{-}\right][/latex] = 3 × 10–4 = x2, x = 2 × 10–2M;
    2. Ksp = [Pb2+][I]2 = 8.7 × 109 = x(2x)3 = 4x3, x = 1.3 × 10–3M;
    3. Ksp = [latex]{\left[{\text{Ag}}^{\text{+}}\right]}^{4}\left[{\text{Fe(CN)}}_{6}{}^{\text{4-}}\right][/latex] = 1.55 × 10–41 = (4x)4x = 256x5, x = 2.27 × 10–9M;
    4. Ksp = [latex]\left[{\text{Hg}}_{2}{}^{\text{2+}}\right]{\left[{\text{I}}^{-}\right]}^{2}[/latex] = 4.5 × 10–29 = [x][2x]2 = 4x3, x = 2.2 × 10–10M
  7. The correct concentrations are as follows:
    1. Ksp = 1.8 × 10–10 = [latex]\ce{[Ag+][Cl-]}[/latex] = x(x + 0.025), where x = [Ag+]. Assume that x is small when compared with 0.025 and therefore ignore it:
      • [latex]x=\frac{1.8\times {10}^{-10}}{0.025}=7.2\times {10}^{-9}\text{}M=\left[{\text{Ag}}^{\text{+}}\right],\text{}\left[{\text{Cl}}^{-}\right]=0.02\text{5}M[/latex]
      • Check: [latex]\frac{7.2\times {10}^{-9}\text{}M}{0.025\text{}M}\times \text{100%}=\text{2.9}\times {10}^{-5}%[/latex], an insignificant change;
    2. Ksp = 3.9 × 10–11 = [latex]\ce{[Ca^2+][F-]2}[/latex] = x(2x + 0.00133 M)2, where x = [latex]\ce{[Ca^2+]}[/latex]. Assume that x is small when compared with 0.0013 M and disregard it:
      • [latex]x=\frac{\text{3.9}\times {10}^{-11}}{{\left(0.00133\right)}^{2}}=2.2\times {10}^{-5}\text{}M=\left[{\text{Ca}}^{\text{2+}}\right],\text{}\left[{\text{F}}^{-}\right]=0.0013\text{}M[/latex]
      • Check: [latex]\frac{\text{2.25}\times {10}^{-5}\text{}M}{0.00133\text{}M}\times \text{100%}=\text{1.69%}[/latex]. This value is less than 5% and can be ignored.
    3. Find the concentration of [latex]\ce{K2SO4}[/latex]:
      • [latex]\frac{\text{19.50 g}}{174.2{\text{60 g mol}}^{-1}}=\text{0.1119 mol}[/latex]
        [latex]\frac{0.1119\text{mol}}{0.5\text{L}}=\text{0.2238}M={\text{[SO}}_{4}{}^{2-}][/latex]
        Ksp = 1.18 × 10–18 = [Ag+]2 [latex]{\text{[SO}}_{4}{}^{2-}][/latex] = 4x2(x + 0.2238)
        [latex]{x}^{2}=\frac{1.18\times {10}^{-18}}{4\left(0.2238\right)}=\text{1.32}\times {10}^{-18}[/latex]
        x = 1.15 × 10–9[Ag+] = 2x = 2.30 × 10–9M
      • Check: [latex]\frac{1.15\times {10}^{-9}}{0.2238}\times 100%=\text{5.14}\times {10}^{-7}[/latex]; the condition is satisfied.
    4. Find the concentration of [latex]\ce{OH-}[/latex] from the pH:
      • pOH = 14.00 – 11.45 = 2.55
        [OH] = 2.8 × 10–3M
        Ksp = 4.5 × 10–17 = [Zn2+][OH]2 = x(2x + 2.8 × 10–3)2
      • Assume that x is small when compared with 2.8 × 10–3:
        [latex]x=\frac{4.5\times {10}^{-17}}{{\left(2.8\times {10}^{-3}\right)}^{2}}=\text{5.7}\times 10 - 12\text{}M={\text{[Zn}}^{\text{2+}}\text{]}[/latex]
      • Check: [latex]\frac{5.7\times {10}^{-12}}{2.8\times {10}^{-3}}\times \text{100%}=\text{2.0}\times {10}^{-7}%[/latex]; x is less than 5% of [OH] and is, therefore, negligible. In each case the change in initial concentration of the common ion is less than 5%.
  8. The answers are as follows:
    1. Ksp = 1.9 × 10–4 = [latex]\ce{[Ti+][Cl-]}[/latex]; Let x = [latex]\ce{[Cl-]}[/latex]:1.9 × 10–4 = (x = 0.025)x
      1. Assume that x is small when compared with 0.025:
        1. [latex]x=\frac{1.9\times {10}^{-4}}{0.025}=7.6\times {10}^{-3}\text{}M[/latex]
      2. Check: [latex]\frac{7.6\times {10}^{-3}}{0.025}\times \text{100%}=\text{30%}[/latex]
      3. This value is too large to drop x. Therefore solve by using the quadratic equation:
        1. [latex]\frac{-b\pm \sqrt{{b}^{2}-4ac}}{2a}[/latex]
        2. x2 + 0.025x – 1.9 × 10–4 = 0
        3. [latex]\begin{array}{l}{ }x=\frac{-0.025\pm \sqrt{6.25\times {10}^{-4}+7.6\times {10}^{-4}}}{2}=\frac{-0.025\pm \sqrt{1.385\times {10}^{-3}}}{2}\\ =\frac{-0.025\pm 0.0372}{2}=0.00\text{61}M\end{array}[/latex]
      4. (Use only the positive answer for physical sense.)
        1. [Ti+] = 0.025 + 0.0061 = 3.1 × 10–2M
        2. [Cl] = 6.1 × 10–3
    2. Ksp = 1.7 × 10–6 = [Ba2+][F]2:
      1. Let x = [Ba2+]
      2. 1.7 × 10–6 = x(x + 0.0313)2 = 1.7 × 10–3M
      3. Check: [latex]\frac{1.7\times {10}^{-3}}{0.0313}\times \text{100%}=\text{5.5%}[/latex]
      4. This value is too large to drop x, and the entire equation must be solved. One method to find the answer is to solve by successive approximations. Begin by choosing the value of x that has just been calculated:
      5. x′(5.4 × 10–5 + 0.0313)2 = 1.7 × 10–3 or
      6. [latex]x\prime =\frac{1.7\times {10}^{-6}}{1.089\times {10}^{-3}}=\text{1.6}\times {10}^{-3}[/latex]
      7. A third approximation using this last calculation is as follows:
      8. x′′(1.7 × 10–3 + 0.0313)2 = 1.7 × 10–6 or
      9. [latex]x\prime \prime =\frac{1.7\times {10}^{-6}}{1.089\times {10}^{-3}}=\text{1.6}\times {10}^{-3}[/latex]
      10. This value is well within 5% and is acceptable.
      11. [Ba2+] = 1.6 × 10–3M
      12. [F] = (1.6 × 10–3 + 0.0313) = 0.0329 M;
    3. Find the molar concentration of the [latex]\ce{Mg(NO3)2}[/latex]. The molar mass of [latex]\ce{Mg(NO3)2}[/latex] is 148.3149 g/mol. The number of moles is [latex]\frac{\text{8.156 g}}{148.314{\text{9 g mol}}^{-1}}=\text{0.05499 mol}[/latex]
      1. [latex]M=\frac{\text{0.05499 mol}}{\text{2.250 L}}=\text{0.02444 M}[/latex]
      2. Let x = [latex]\left[{\text{C}}_{2}{\text{O}}_{4}^{2-}\right][/latex] and assume that x is small when compared with 0.02444 M.
      3. Ksp = 8.6 × 10–5 = [Mg2+] [latex]\left[{\text{C}}_{2}{\text{O}}_{4}^{2-}\right][/latex] = (x)(x + 0.02444)
      4. 0.02444x = 8.6 × 10–5
      5. x = [latex]\left[{\text{C}}_{2}{\text{O}}_{4}^{2-}\right][/latex] = 3.5 × 10–3
      6. Check: [latex]\frac{3.5\times {10}^{-3}}{0.02444}\times \text{100%}=\text{14%}[/latex]
      7. This value is greater than 5%, so the quadratic equation must be used to solve for x:
      8. [latex]\begin{array}{l}{}\frac{-b\pm \sqrt{{b}^{2}-4ac}}{2a}\\{x}^{2}+0.02444x - 8.6\times {10}^{-5}=0\\x=\frac{-0.02444\pm \sqrt{5.973\times {10}^{-4}+3.44\times {10}^{-4}}}{2}=\text{}\frac{-0.02444\pm 0.03068}{2}\end{array}[/latex]
      9. (Use only the positive answer for physical sense.)
      10. x′ = [latex]\left[{\text{C}}_{2}{\text{O}}_{4}{}^{2-}\right][/latex] = 3.5 × 10–3M
      11. [Mg2+] = 3.1 × 10–3 + 0.02444 = 0.0275 M
      12. (d) pH = 12.700; pOH = 1.300
      13. [latex]\ce{[OH-]}[/latex] = 0.0501 M; Let x = [latex]\ce{[Ca^2+]}[/latex]
      14. Ksp = 7.9 × 10–6 = [latex]\ce{[Ca^2+][OH-]^2}[/latex] = (x)(x + 0.050)2
      15. Assume that x is small when compared with 0.050 M:
      16. x = [latex]\ce{[Ca^2+]}[/latex] = 3.15 × 10–3 (one additional significant figure is carried)
      17. Check: [latex]\frac{3.15\times {10}^{-3}}{0.050}\times \text{100%}=\text{6.28%}[/latex]
      18. This value is greater than 5%, so a more exact method, such as successive approximations, must be used. Begin by choosing the value of x that has just been calculated:
      19. x′(3.15 × 10–3 + 0.0501)2 = 7.9 × 10–6 or
      20. [latex]x\prime =\frac{7.9\times {10}^{-6}}{2.836\times {10}^{-3}}=\text{2.8}\times {10}^{-3}[/latex]
      21. [latex]\ce{[Ca^2+]}[/latex] = 2.8 × 10–3M
      22. [latex]\ce{[OH-]}[/latex] = (2.8 × 10–3 + 0.0501) = 0.053 × 10–2M
      23. In each case, the initial concentration of the common ion changes by more than 5%.
  9. The changes in concentration are greater than 5% and thus exceed the maximum value for disregarding the change.
  10. [latex]\ce{Ca(OH)2: [Ca^2+][OH-]^2}[/latex] = 7.9 × 10–6
    1. Let x be [latex]\ce{[Ca^2+]}[/latex] = molar solubility; then [latex]\ce{[OH-]}[/latex] = 2x
    2. Ksp = x(2x)2 = 4x3 = 7.9 × 10–6
    3. x3 = 1.975 × 10–6
    4. x = 0.013 M
    5. [latex]\ce{CaCO3: [Ca^2+][CO3^2-]}[/latex] = 4.8 × 10–9
    6. Let x be [latex]\ce{[Ca^2+]}[/latex]; then [latex]{\text{[CO}}_{3}^{2-}][/latex] = [Ca2+] = molar solubility
    7. Ksp = x2 = 4.8 × 10–9
    8. x = 6.9 × 10–5M
    9. [latex]\ce{CaSO4·2H2O: [Ca^2+][SO4^2-]}\text{\cdot }\ce{[H2O]^2}[/latex] = 2.4 10–5
    10. Let x be [latex]\ce{[Ca^2+]}[/latex] = molar solubility = [latex]{\text{[SO}}_{4}^{2-}][/latex]; then [latex]\ce{[H2O]}[/latex] = 2x
    11. Ksp = (x)(x)(2x)2 = 2.4 × 10–5
    12. x4 = 6.0 × 10–6
    13. x = 0.049 M
    14. This value is more than three times the value given by the Handbook of Chemistry and Physics of (0.014 M) and reflects the complex interaction of water within the precipitate:
    15. [latex]\ce{CaC2O4·H2O: [Ca^2+][C2O4^2-][H2O]}[/latex] = 2.27 × 10–9
    16. Let x be [latex]\ce{[Ca^2+]}[/latex] = molar solubility = [latex]\left[{\text{C}}_{2}{\text{O}}_{4}^{2-}\right][/latex] = [H2O]
    17. x3 = 2.27 × 10–9
    18. x = 1.3 × 10–3M
    19. In this case, the interaction of water is also complex and the solubility is considerably less than that calculated.
    20. Ca3(PO4)2: [Ca2+]3 [latex]{\left[{\text{PO}}_{4}^{3-}\right]}^{2}[/latex] = 1 × 10–25
    21. Upon solution there are three Ca2+ and two [latex]{\text{PO}}_{4}^{3-}[/latex] ions. Let the concentration of Ca2+ formed upon solution be x. Then [latex]\frac{2}{3}x[/latex] is the concentration of [latex]{\text{PO}}_{4}{}^{\text{3-}}:[/latex]
    22. [latex]{x}^{3}{\left(\frac{2}{3}x\right)}^{2}{x}^{3}=1\times {10}^{-25}=\text{0.4444}{x}^{5}[/latex]
    23. x = 1 × 10–5M = [Ca2+]
    24. The solubility is then one-third the concentration of Ca2+, or 4 × 10–6.
  11. First, find the concentration in a saturated solution of CaSO4. Before placing the CaSO4 in water, the concentrations of Ca2+ and [latex]{\text{SO}}_{4}^{2-}[/latex] are 0. Let x be the change in concentration of Ca2+, which is equal to the concentration of [latex]{\text{SO}}_{4}^{2-}:[/latex]
    1. Ksp = [Ca2+] [latex]\left[{\text{SO}}_{4}^{2-}\right][/latex] = 2.4 × 10–5
    2. x × x = x2 = 2.4 × 10–5
    3. [latex]x=\sqrt{2.4\times {10}^{-5}}[/latex]
    4. x = 4.9 × 10–3M = [latex]\left[{\text{SO}}_{4}^{2-}\right][/latex] = [Ca2+]
    5. Since this concentration is higher than 2.60 × 10–3M, “gyp” water does not meet the standards.
  12. The amount of CaSO4·2H2O that dissolves is limited by the presence of a substantial amount of [latex]{\text{SO}}_{4}^{2-}[/latex] already in solution from the 0.010 M [latex]{\text{SO}}_{4}{}^{-}[/latex]. This is a common-ion problem. Let x be the change in concentration of Ca2+ and of [latex]{\text{SO}}_{4}^{2-}[/latex] that dissociates from CaSO4:
    1. [latex]{\text{CaSO}}_{4}\left(s\right)\longrightarrow {\text{Ca}}^{\text{2+}}\left(aq\right)+{\text{SO}}_{4}{}^{\text{2-}}\left(aq\right)[/latex]
    2. Ksp = [Ca2+] [latex]{\text{[SO}}_{4}^{2-}][/latex] = 2.4 × 10–5
    3. Addition of 0.010 M [latex]{\text{SO}}_{4}^{2-}[/latex] generated from the complete dissociation of 0.010 M SO4 gives
    4. [x][x + 0.010] = 2.4 × 10–5
    5. Here, x cannot be neglected in comparison with 0.010 M; the quadratic equation must be used. In standard form:
    6. x2 + 0.010x – 2.4 × 10–5 = 0
    7. [latex]x=\frac{-0.01\pm \sqrt{1\times {10}^{-4}+9.6\times {10}^{-5}}}{2}=\frac{-0.01\pm 1.4\times {10}^{-2}}{2}[/latex]
    8. Only the positive value will give a meaningful answer:
    9. x = 2.0 × 10–3 = [Ca2+]
    10. This is also the concentration of CaSO4·2H2O that has dissolved. The mass of the salt in 1 L is
    11. Mass (CaSO4·2H2O) = 2.0 × 10–3 mol/L × 172.16 g/mol = 0.34 g/L
    12. Note that the presence of the common ion, [latex]{\text{SO}}_{4}^{2-}[/latex], has caused a decrease in the concentration of Ca2+ that otherwise would be in solution:
    13. [latex]\sqrt{2.4\times {10}^{-5}}=\text{4.9}\times {10}^{-5}\text{}M[/latex]
  13. In each of the following, allow x to be the molar concentration of the ion occurring only once in the formula.
    1. Ksp = [Ag+][Cl] = 1.5 – 10–16 = [x2], [x] = 1.2 – 10–8M, [Ag+] = [I] = 1.2 × 10–8M
    2. Ksp = [latex]{{\text{[Ag}}^{\text{+}}]}^{2}\left[{\text{SO}}_{4}^{2-}\right][/latex] = 1.18 × 10–5 = [2x]2[x], 4x3 = 1.18 × 10–5, x = 1.43 × 10–2M
      As there are 2 Ag+ ions for each [latex]{\text{SO}}_{4}^{2-}[/latex] ion, [Ag+] = 2.86 × 10–2M, [latex]{\text{[SO}}_{4}^{2-}][/latex] = 1.43 × 10–2M; (c) Ksp = [Mn2+]2[OH]2 = 4.5 × 10–14 = [x][2x]2, 4x3 = 4.5 × 10–14, x = 2.24 × 10–5M.
    3. Since there are two OH ions for each Mn2+ ion, multiplication of x by 2 gives 4.48 × 10–5M. If the value of x is rounded to the correct number of significant figures, [Mn2+] = 2.2 × 10–5M. [OH] = 4.5 × 10–5M. If the value of x is rounded before determining the value of [OH], the resulting value of [OH] is 4.4 × 10–5M. We normally maintain one additional figure in the calculator throughout all calculations before rounding.
    4. Ksp = [Sr2+][OH]2 = 3.2 × 10–4 = [x][2x]2, 4x3 = 3.2 × 10–4, x = 4.3 × 10–2M.
      Substitution gives [Sr2+] = 4.3 × 10–2 M, [OH] = 8.6 × 10–2M
    5. Ksp = [Mg2+]2[OH]2 = 1.5 × 10–11 = [x][2x]2, 4x3 = 1.5 × 10–11, x = 1.55 × 10–4M, 2x = 3.1 × 10–4.
      Substitution and taking the correct number of significant figures gives [Mg2+] = 1.6 × 10–4M, [OH–] = 3.1 × 10–4M. If the number is rounded first, the first value is still [Mg2+] = 1.6 × 10–4M, but the second is [OH] = 3.2 × 10–4M.
  14. In each case the value of Ksp is found by multiplication of the concentrations raised to the ion’s stoichiometric power. Molar units are not normally shown in the value of K.
    1. TlCl: Ksp = (1.4 × 10–2)(1.2 × 10–2) = 2.0 × 10–4
    2. Ce(IO3)4: Ksp = (1.8 × 10–4)(2.6 × 10–13)4 = 5.1 × 10–17
    3. Gd2(SO4)3: Ksp = (0.132)2(0.198)3 = 1.35 × 10–4
    4. Ag2SO4: Ksp = (2.40 × 10–2)2(2.05 × 10–2) = 1.18 × 10–5
    5. BaSO4: Ksp = (0.500)(2.16 × 10–10) = 1.08 × 10–10
  15. The answers are as follows:
    1. [latex]{\text{CaCO}}_{3}:{\text{CaCO}}_{3}\left(s\right)\longrightarrow {\text{Ca}}^{\text{2+}}\left(aq\right)+{\text{CO}}_{3}{}^{2-}\left(aq\right)[/latex]
      1. Ksp = [Ca2+] [latex]{\text{[CO}}_{3}^{2-}][/latex] = 4.8 × 10–9
      2. test Ksp against Q = [Ca2+] [latex]{\text{[CO}}_{3}^{2-}][/latex]
      3. Q = [Ca2+] [latex]{\text{[CO}}_{3}^{2-}][/latex] = (0.003)(0.003) = 9 × 10–6
      4. Ksp = 4.8 × 10–9 < 9 × 10–6
    2. The ion product does exceed Ksp, so CaCO3 does precipitate.
    3. [latex]{\text{Co(OH)}}_{2}:{\text{Co(OH)}}_{2}\left(s\right)\longrightarrow {\text{Co}}^{\text{2+}}\left(aq\right)+{\text{2OH}}^{-}\left(aq\right)[/latex]
      1. Ksp = [Co2+][OH]2 = 2 × 10–16
      2. test Ksp against Q = [Co2+][OH]2
      3. Q = [Co2+][OH]2 = (0.01)(1 × 10–7)2 = 1 × 10–16
      4. Ksp = 2 × 10–16 > 1 × 10–16
    4. The ion product does not exceed Ksp, so the compound does not precipitate.
    5. CaHPO4: (Ksp = 5 × 10–6):
      1. Q = [Ca2+] [latex]{\text{[HPO}}_{4}^{2-}][/latex] = (0.01)(2 × 10–6) = 2 × 10–8 < Ksp
    6. The ion product does not exceed Ksp, so compound does not precipitate.
    7. Pb3(PO4)2: (Ksp = 3 × 10–44):
      1. Q = [Pb2+]3 [latex]{{\text{[PO}}_{4}^{3-}]}^{2}[/latex] = (0.01)3(1 × 10–13)2 = 1 × 10–32 > Ksp
    8. The ion product exceeds Ksp, so the compound precipitates.
  16. Precipitation of [latex]{\text{SO}}_{4}^{2-}[/latex] will begin when the ion product of the concentration of the [latex]{\text{SO}}_{4}^{2-}[/latex] and Ba2+ ions exceeds the Ksp of BaSO4.
    1. Ksp = 1.08 × 10–10 = [Ba2+] [latex]\left[{\text{SO}}_{4}^{2-}\right][/latex] = (0.0758) [latex]{\text{[SO}}_{4}^{2-}][/latex]
    2. [latex]\left[\text{SO}_{4}^{2-}\right]=\frac{1.08\times{10}^{-10}}{0.0758}=\text{1.42}\times{10}^{-9}M[/latex]
  17. Precipitation of Ag3PO4 will begin when the ion product of the concentrations of the Ag+ and [latex]{\text{PO}}_{4}{}^{\text{3-}}[/latex] ions exceeds Ksp:
    1. [latex]{\text{Ag}}_{3}{\text{PO}}_{4}\left(s\right)\longrightarrow {\text{3Ag}}^{\text{+}}\left(aq\right)+{\text{PO}}_{4}{}^{\text{3-}}\left(aq\right)[/latex]
    2. Ksp = 1.8 × 10–18 = [Ag+]3 [latex]{\text{[PO}}_{4}{}^{\text{3-}}][/latex] = (0.0125)3 [latex]{\text{[PO}}_{4}{}^{3-}][/latex]
    3. [latex]\left[\text{PO}_{4}^{3-}\right]=\frac{1.08\times{10}^{-18}}{\left(0.0125\right)^{3}}=\text{9.2}\times {10}^{-13}M[/latex]
  18. [latex]{\text{Ag}}_{2}{\text{CO}}_{3}\left(s\right)\longrightarrow {\text{2Ag}}^{\text{+}}\left(aq\right)+{\text{CO}}_{3}{}^{\text{2-}}\left(aq\right)[/latex]
    1. [Ag+]2 [latex]\left[{\text{CO}}_{3}{}^{\text{2-}}\right][/latex] = Ksp = 8.2 × 10–12
    2. [Ag+]2(2.5 × 10–6) = 8.2 × 10–12
    3. [latex]\left[\text{Ag}^{+}\right]^{2}=\frac{8.2\times{10}^{-12}}{2.50\times{10}^{-6}}=\text{3.28}\times{10}^{-6}[/latex]
    4. [Ag+] = 1.8 × 10–3M
  19. In the Ksp expression, substitute the concentration of Ca2+ and solve for [F].
    1. Ksp = 3.9 × 10–11 = [Ca2+][F]2 = (1.0 × 10–4)[F]2
    2. [latex]{\left[{\text{F}}^{-}\right]}^{2}=\frac{3.9\times {10}^{-11}}{1.0\times {10}^{-4}}=\text{3.9}\times {10}^{-7}[/latex]
    3. [F] = 6.2 × 10–4
  20. (a) 2.28 L; (b) 7.3 × 10–7 g
  21. When 99.9% of Cu2+ has precipitated as CuS, then 0.1% remains in solution.
    1. [latex]\frac{0.1}{100}[/latex] × 0.010 mol/L = 1 × 10–5M = [Cu2+]
    2. [Cu2+][S2–] = Ksp = 6.7 × 10–42
    3. (1 × 10–5)[S2–] = 6.7 × 10–42
    4. [S2–] = 7 × 10–37M
    5. [Cd2+][S2–]Ksp = 2.8 × 10–35
    6. [Cd2+](7 × 10–37) = 2.8 × 10–35
    7. [Cd2+] = 4 × 101M
    8. Thus [Cd2+] can increase to about 40 M before precipitation begins. [Cd2+] is only 0.010 M, so 100% of it is dissolved.
  22. To compare ions of the same oxidation state, look for compounds with a common counter ion that have very different Ksp values, one of which has a relatively large Ksp—that is, a compound that is somewhat soluble.
    1. [latex]{\text{Hg}}_{2}{}^{\text{2+}}[/latex] and Cu2+: Add [latex]{\text{SO}}_{4}{}^{\text{2-}}[/latex]. CuSO4 is soluble (see Solubility Products), but Ksp for Hg2SO4 is 6.2 × 10–7. When only 0.1% [latex]{\text{Hg}}_{2}{}^{\text{2+}}[/latex] remains in solution:
      1. [latex]\left[{\text{Hg}}_{2}{}^{\text{2+}}\right]=\frac{0.1%}{100%}\times \text{0.10}=1\times {10}^{-4}\text{}M[/latex]
    2. and
      1. [latex]\left[{\text{SO}}_{4}^{2-}\right]=\frac{{K}_{\text{sp}}}{\left[{\text{Hg}}_{2}{}^{\text{2+}}\right]}=\frac{6.2\times {10}^{-7}}{1\times {10}^{-4}}=\text{6.2}\times {10}^{-3}\text{}M[/latex];
    3. [latex]{\text{SO}}_{4}^{2-}[/latex] and Cl: Add Ba2+. BaCl2 is soluble (see the section on catalysis), but Ksp for BaSO4 is 1.08 × 10–10. When only 0.1% [latex]{\text{SO}}_{4}^{2-}[/latex] remains in solution,
      1. [latex]{\text{[SO}}_{4}^{2-}][/latex] = 1 × 10–4M
    4. and
      1. [latex]\left[{\text{Ba}}^{\text{2+}}\right]=\frac{1.08\times {10}^{-10}}{1\times {10}^{-4}}=1\times {10}^{-6}\text{}M[/latex];
    5. Hg2+ and Co2+: Add S2–: For the least soluble form of CoS, Ksp = 6.7 × 10–29 and for HgS, Ksp = 2 × 10–59. CoS will not begin to precipitate until:
      1. [Co2+][S2–] = Ksp = 6.7 × 10–29
      2. (0.10)[S2–] = 6.7 × 10–29
      3. [S2–] = 6.7 × 10–28
    6. At that concentration:
      1. [Hg2+](6.7 × 10–28) = 2 × 10–59
      2. [Hg2+] = 3 × 10–32M
    7. That is, it is virtually 100% precipitated. For a saturated (0.10 M) H2S solution, the corresponding [latex]\left[\text{H}_{3}\text{O}^{+}\right][/latex] is:
      1. [latex]\left[{\text{H}}_{3}{\text{O}}^{\text{+}}\right]=\frac{\left[{\text{H}}_{2}\text{S}\right]}{\left[{\text{S}}^{2-}\right]}{K}_{\text{a}}=\frac{\left(0.10\right)}{\left(6.7\times {10}^{-28}\right)}\times \text{1.0}\times {10}^{-26}[/latex]
      2. [latex]\left[\text{H}_{3}\text{O}^{+}\right]=1.5M[/latex]
    8. A solution more basic than this would supply enough S2– for CoS to precipitate.
    9. Zn2+ and Sr2+: Add OH until [OH] = 0.050 M. For Sr(OH)2·8H2O, Ksp = 3.2 × 10–4. For Zn(OH)2, Ksp = 4.5 × 10–11. When Zn2+ is 99.9% precipitated, then [Zn2+] = 1 × 10–4M and
      1. [latex]{\left[{\text{OH}}^{-}\right]}^{2}=\frac{{K}_{\text{sp}}}{\left[{\text{Zn}}^{\text{2+}}\right]}\text{=}\frac{4.5\times {10}^{-11}}{1\times {10}^{-4}}=\text{4.5}\times {10}^{-7}[/latex]
      2. [OH] = 7 × 10–4M
    10. When Sr(OH)2·8H2O just begins to precipitate:
      1. [latex]{\left[{\text{OH}}^{-}\right]}^{2}=\frac{{K}_{\text{sp}}}{\left[{\text{Sr}}^{\text{2+}}\right]}=\frac{3.2\times {10}^{-4}}{0.10}=\text{3.2}\times {10}^{-3}[/latex]
      2. [OH] = 0.057 M
    11. If [OH] is maintained less than 0.056 M, then Zn2+ will precipitate and Sr2+ will not.
    12. Ba2+ and Mg2+: Add [latex]{\text{SO}}_{4}^{2-}[/latex]. MgSO4 is soluble and BaSO4 is not (Ksp = 2 × 10–10).
    13. [latex]{\text{CO}}_{3}^{2-}[/latex] and OH: Add Ba2+. For Ba(OH)2, 8H2O, Ksp = 5.0 × 10–3; for BaCO3, Ksp = 8.1 × 10–9. When 99.9% of [latex]{\text{CO}}_{3}^{2-}[/latex] has been precipitated [latex]{\text{[CO}}_{3}^{2-}][/latex] = 1 × 10–4M and
      1. [latex]\left[\text{Ba}^{2+}\right]=\frac{K_{\text{sp}}}{\left[\text{CO}_{3}^{2-}\right]}=\frac{8.1\times{10}^{-9}}{1\times{10}^{-4}}=\text{8.1}\times{10}^{-5}M[/latex]
    14. Ba(OH)2·8H2O begins to precipitate when:
      1. [latex]{\text{[Ba}}^{\text{2+}}\text{]}=\frac{{K}_{\text{sp}}}{{\left[{\text{OH}}^{-}\right]}^{2}}=\frac{5.0\times {10}^{-3}}{{\left(0.10\right)}^{2}}=\text{0.50}M[/latex]
    15. As long as [Ba2+] is maintained at less than 0.50 M, BaCO3 precipitates and Ba(OH)2·8H2O does not.
  23. Compare the concentration of Ag+ as determined from the two solubility product expressions. The one requiring the smaller [Ag+] will precipitate first.
    1. For AgCl: Ksp = 1.8 × 10–10 = [Ag+][Cl]
      1. [latex]\left[{\text{Ag}}^{\text{+}}\right]=\frac{1.8\times {10}^{-10}}{\left[0.10\right]}\text{=1.8}\times {10}^{-9}\text{}M[/latex]
    2. For AgI: Ksp = 1.5 × 10–16 = [Ag+][I]
      1. [latex]\left[{\text{Ag}}^{\text{+}}\right]=\frac{1.5\times {10}^{-16}}{1.0\times {10}^{-2}}=\text{1.5}\times {10}^{-9}\text{}M[/latex]
    3. As the value of [Ag+] is smaller for AgI, AgI will precipitate first.
  24. The dissolution of Ca3(PO4)2 yields:
    1. [latex]{\text{Ca}}_{3}{{\text{(PO}}_{4})}_{2}\left(s\right)\rightleftharpoons {\text{3Ca}}^{\text{2+}}\left(aq\right)+{\text{2PO}}_{4}^{3-}\left(aq\right)[/latex]
  25. Given the concentration of Ca2+ in solution, the maximum [latex]\left[\text{PO}_{4}^{3-}\right][/latex] can be calculated by using the Ksp expression for Ca3(PO4)2:
    1. Ksp = 1 × 10–25 = [Ca2+]3 [latex]{{\text{[PO}}_{4}{}^{3-]}}^{2}[/latex]
    2. [latex]{\left[{\text{Ca}}^{\text{2+}}\right]}_{\text{urine}}=\frac{0.10\text{}g\left(\frac{1\text{}mol}{40.08\text{}g}\right)}{1.4\text{L}}=\text{1.8}\times {10}^{-3}\text{}M[/latex]
    3. [latex]{{\text{[PO}}_{4}{}^{3-}]}^{2}=\frac{1\times {10}^{-25}}{{\left(1.8\times {10}^{-3}\right)}^{3}}=\text{1.7}\times {10}^{-17}[/latex]
    4. [latex]{{\text{[PO}}_{4}{}^{3-}]}^{2}=4\times {10}^{-9}\text{}M[/latex]
  26. Calculate the amount of Mg2+ present in sea water; then use Ksp to calculate the amount of Ca(OH)2 required to precipitate the magnesium.
    1. mass Mg = 1.00 × 103 L × 1000 cm3/L × 1.026 g/cm3 × 1272 ppm × 10–6 ppm–1 = 1.305 × 103 g
  27. The concentration is 1.305 g/L. If 99.9% is to be recovered 0.999 × 1.305 g/L = 1.304 g/L will be obtained. The molar concentration is:
    1. [latex]\frac{1.304{\text{g L}}^{-1}}{24.305{\text{g mol}}^{-1}}=\text{0.05365}M[/latex]
  28. As the Ca(OH)2 reacts with Mg2+ on a 1:1 mol basis, the amount of Ca(OH)2 required to precipitate 99.9% of the Mg2+ in 1 L is:
    1. 0.05365 M × 74.09 g/mol Ca(OH)2 = 3.97 g/L
  29. For treatment of 1000 L, 1000 L × 3.97 g/L = 3.97 × 103 g = 3.97 kg. However, additional [OH] must be added to maintain the equilibrium:
    1. [latex]{\text{Mg(OH)}}_{2}\left(s\right)\rightleftharpoons {\text{Mg}}^{\text{2+}}\left(aq\right)+{\text{2OH}}^{-}\left(aq\right)\left({K}_{\text{sp}}=\text{1.5}\times {10}^{-11}\right)[/latex]
  30. When the initial 1.035 g/L is reduced to 0.1% of the original, the molarity is calculated as:
    1. [latex]\frac{0.001\times {\text{1.305 g L}}^{-1}}{24.305{\text{g mol}}^{-1}}=\text{5.369}\times {10}^{-5}\text{}M[/latex]
  31. The added amount of OH required is found from the solubility product:
    1. [Mg2+][OH]2 = (5.369 × 10–5)[OH]2 = 1.5 × 10–11 = Ksp
    2. [OH] = 5.29 × 10–4
  32. Thus an additional [latex]\frac{1}{2}[/latex] × 5.29 × 10–4 mol (2.65 × 10–4 mol) of Ca(OH)2 per liter is required to supply the OH. For 1000 L:
    1. [latex]{\text{mass Ca(OH)}}_{2}=2.65\times {10}^{-4}{\text{mol Ca(OH)}}_{2}{\text{L}}^{-1}\times \text{1.00}\times {10}^{3}\text{L}\times \frac{74.0946\text{g}}{{\text{mol Ca(OH)}}_{2}}=\text{20 g}[/latex]
  33. The total Ca(OH)2 required is 3.97 kg + 0.020 kg = 3.99 kg.
    1. Ksp = [La3+] [latex]{\left[{\text{IO}}_{3}{}^{-}\right]}^{3}[/latex] = [latex]\left(\frac{1}{3}\times \text{3.1}\times {10}^{-3}\right)[/latex] (3.1 × 10–3)3 = (0.0010)(3.0 × 10–8) = 3.0 × 10–11
    2. Ksp = [Cu2+] [latex]{\left[{\text{IO}}_{3}{}^{-}\right]}^{2}[/latex] = x(2x)2 = 7.4 × 10–8
    3. 4x3 = 7.4 × 10–8
    4. x3 = 1.85 × 10–8
    5. x = 2.64 × 10–3
    6. [Cu2+] = 2.6 × 10–3
    7. [latex]\left[{\text{IO}}_{3}{}^{-}\right][/latex] = 2x = 5.3 × 10–3
  34. 1.8 × 10–5 g Pb(OH)2
  35. [latex]{\text{Mg(OH)}}_{2}\text{(s)}\rightleftharpoons {\text{Mg}}^{\text{2+}}+{\text{2OH}}^{-}{K}_{\text{sp}}=\left[{\text{Mg}}^{\text{2+}}\right]{\left[{\text{OH}}^{-}\right]}^{2}[/latex]
  36. 7.1 × 10–12 = (x)(2x)2 = 4x3
  37. x = 1.21 × 10–4M = [Mg2+]
  38. [latex]\frac{1.21\times {10}^{-4}\text{mol}}{\text{L}}\times 0.20\text{0 L}\times \frac{{\text{1 mol Mg(OH)}}_{2}}{{\text{1 mol Mg}}^{\text{2+}}}\times \frac{{\text{58.3 g Mg(OH)}}_{2}}{{\text{1 mol Mg(OH)}}_{2}}=\text{1.14}\times {10}^{-3}{\text{Mg(OH)}}_{2}[/latex]
  39. SrCO3 will form first, since it has the smallest Ksp value it is the least soluble. BaCO3 will be the last to precipitate, it has the largest Ksp value.

[/hidden-answer]

16.2 Lewis Acids and Bases

  1. Explain why the addition of [latex]\ce{NH3}[/latex] or [latex]\ce{HNO3}[/latex] to a saturated solution of [latex]\ce{Ag2CO3}[/latex] in contact with solid [latex]\ce{Ag2CO3}[/latex] increases the solubility of the solid.
  2. Calculate the cadmium ion concentration, [latex]\ce{[Cd^2+]}[/latex], in a solution prepared by mixing 0.100 L of 0.0100 M [latex]\ce{Cd(NO3)2}[/latex] with 1.150 L of 0.100 NH3(aq).
  3. Explain why addition of [latex]\ce{NH3}[/latex] or [latex]\ce{HNO3}[/latex] to a saturated solution of [latex]\ce{Cu(OH)2}[/latex] in contact with solid [latex]\ce{Cu(OH)2}[/latex] increases the solubility of the solid.
  4. Using the value of the formation constant for the complex ion [latex]\ce{Co(NH3)6^2+}[/latex], calculate the dissociation constant.
  5. Using the dissociation constant, Kd = 3.4 [latex]\times[/latex] 10–15, calculate the equilibrium concentrations of [latex]\ce{Zn^2+}[/latex] and [latex]\ce{OH-}[/latex] in a 0.0465-M solution of [latex]\ce{Zn(OH)4^2-}[/latex].
  6. Using the dissociation constant, Kd = 2.2 [latex]\times[/latex] 10–34, calculate the equilibrium concentrations of [latex]\ce{Co^3+}[/latex] and [latex]\ce{NH3}[/latex] in a 0.500-M solution of [latex]\ce{Co(NH3)6^3+}[/latex].
  7. Using the dissociation constant, Kd = 1 [latex]\times[/latex] 10–44, calculate the equilibrium concentrations of [latex]\ce{Fe^3+}[/latex] and [latex]\ce{CN-}[/latex] in a 0.333 M solution of [latex]\ce{Fe(CN)6^3-}[/latex].
  8. Calculate the minimum concentration of ammonia needed in 1.0 L of solution to dissolve 3.0 [latex]\times[/latex] 10–3 mol of silver bromide.
  9. A roll of 35-mm black and white photographic film contains about 0.27 g of unexposed AgBr before developing. What mass of [latex]\ce{Na2S2O3.5H2O}[/latex] (sodium thiosulfate pentahydrate or hypo) in 1.0 L of developer is required to dissolve the AgBr as [latex]\ce{Ag(S2O3)2^3-}[/latex] (Kf = 4.7 [latex]\times[/latex] 1013)?
  10. We have seen an introductory definition of an acid: An acid is a compound that reacts with water and increases the amount of hydronium ion present. In the chapter on acids and bases, we saw two more definitions of acids: a compound that donates a proton (a hydrogen ion, [latex]\ce{H+}[/latex]) to another compound is called a Brønsted-Lowry acid, and a Lewis acid is any species that can accept a pair of electrons. Explain why the introductory definition is a macroscopic definition, while the Brønsted-Lowry definition and the Lewis definition are microscopic definitions.
  11. Write the Lewis structures of the reactants and product of each of the following equations, and identify the Lewis acid and the Lewis base in each:
    1. [latex]\ce{CS2}+\ce{SH-}\longrightarrow \ce{HCS3-}[/latex]
    2. [latex]\ce{BF3}+\ce{F-}\longrightarrow \ce{BF4-}[/latex]
    3. [latex]\ce{I-}+\ce{SnI2}\longrightarrow \ce{SnI3-}[/latex]
    4. [latex]\ce{Al(OH)3}+\ce{OH-}\longrightarrow \ce{Al(OH)4-}[/latex]
    5. [latex]\ce{F-}+\ce{SO3}\longrightarrow \ce{SFO3-}[/latex]
  12. Using Lewis structures, write balanced equations for the following reactions:
    1. [latex]\ce{HCl}(g)+\ce{PH3}(g)\longrightarrow[/latex]
    2. [latex]\ce{H3O+}+\ce{CH3-}\longrightarrow[/latex]
    3. [latex]\ce{CaO}+\ce{SO3}\longrightarrow[/latex]
    4. [latex]\ce{NH4+}+\ce{C2H5O-}\longrightarrow[/latex]
  13. Calculate [latex][{\ce{HgCl}}_{4}{}^{2-}][/latex] in a solution prepared by adding 0.0200 mol of [latex]\ce{NaCl}[/latex] to 0.250 L of a 0.100-M [latex]\ce{HgCl2}[/latex] solution.
  14. In a titration of cyanide ion, 28.72 mL of 0.0100 M [latex]\ce{AgNO3}[/latex] is added before precipitation begins. [The reaction of [latex]\ce{Ag+}[/latex] with [latex]\ce{CN-}[/latex] goes to completion, producing the [latex]\ce{Ag(CN)2-}[/latex] complex.] Precipitation of solid [latex]\ce{AgCN}[/latex] takes place when excess [latex]\ce{Ag+}[/latex] is added to the solution, above the amount needed to complete the formation of [latex]\ce{Ag(CN)2-}[/latex]. How many grams of [latex]\ce{NaCN}[/latex] were in the original sample?
  15. What are the concentrations of [latex]\ce{Ag+}[/latex], [latex]\ce{CN-}[/latex], and [latex]\ce{Ag(CN)2-}[/latex] in a saturated solution of [latex]\ce{AgCN}[/latex]?
  16. In dilute aqueous solution [latex]\ce{HF}[/latex] acts as a weak acid. However, pure liquid [latex]\ce{HF}[/latex] (boiling point = 19.5 °C) is a strong acid. In liquid [latex]\ce{HF}[/latex], [latex]\ce{HNO3}[/latex] acts like a base and accepts protons. The acidity of liquid [latex]\ce{HF}[/latex] can be increased by adding one of several inorganic fluorides that are Lewis acids and accept [latex]\ce{F-}[/latex] ion (for example, [latex]\ce{BF3}[/latex] or [latex]\ce{SbF5}[/latex]). Write balanced chemical equations for the reaction of pure [latex]\ce{HNO3}[/latex] with pure [latex]\ce{HF}[/latex] and of pure [latex]\ce{HF}[/latex] with [latex]\ce{BF3}[/latex]. Write the Lewis structures of the reactants and products, and identify the conjugate acid-base pairs.
  17. The simplest amino acid is glycine, [latex]\ce{H2NCH2CO2H}[/latex]. The common feature of amino acids is that they contain the functional groups: an amine group, [latex]\ce{-NH2}[/latex], and a carboxylic acid group, [latex]\ce{-CO2H}[/latex]. An amino acid can function as either an acid or a base. For glycine, the acid strength of the carboxyl group is about the same as that of acetic acid, [latex]\ce{CH3CO2H}[/latex], and the base strength of the amino group is slightly greater than that of ammonia, [latex]\ce{NH3}[/latex].
    1. Write the Lewis structures of the ions that form when glycine is dissolved in 1 M [latex]\ce{HCl}[/latex] and in 1 M [latex]\ce{KOH}[/latex].
    2. Write the Lewis structure of glycine when this amino acid is dissolved in water. (Hint: Consider the relative base strengths of the [latex]\ce{-NH2}[/latex] and [latex]\ce{-CO2-}[/latex] groups.)
  18. Boric acid, [latex]\ce{H3BO3}[/latex], is not a Brønsted-Lowry acid but a Lewis acid.
    1. Write an equation for its reaction with water.
    2. Predict the shape of the anion thus formed.
    3. What is the hybridization on the boron consistent with the shape you have predicted?

[reveal-answer q=”246861″]Show Selected Solutions[/reveal-answer]
[hidden-answer a=”246861″]

2. Cadmium ions associate with ammonia molecules in solution to form the complex ion [latex]\ce{[Cd(NH3)4]^2+}[/latex], which is defined by the following equilibrium:

[latex]\ce{Cd^2+}(aq)+\ce{4NH3}(aq)\longrightarrow \ce{[Cd(NH3)4]^2+}(aq){K}_{\text{f}}=4.0\times {10}^{6}[/latex]

The formation of the complex ion requires 4 mol of [latex]\ce{NH3}[/latex] for each mol of [latex]\ce{Cd^2+}[/latex]. First, calculate the initial amounts of Cd2+ and of NH3 available for association:

[latex]\ce{[Cd^2+]}=\frac{\left(0.100\text{L}\right)\left(0.0100\text{mol}{\text{L}}^{-1}\right)}{0.250\text{L}}=4.00\times {10}^{-3}M[/latex]

[latex]\ce{[NH3]}=\frac{\left(0.150\text{L}\right)\left(0.100\text{mol}{\text{L}}^{-1}\right)}{0.250\text{L}}=6.00\times {10}^{-2}M[/latex]

For the reaction, 4.00 [latex]\times[/latex] 10–3 mol/L of [latex]\ce{Cd^2+}[/latex] would require 4(4.00 [latex]\times[/latex] 10–3 mol/L) of [latex]\ce{NH3}[/latex] or a 1.6 [latex]\times[/latex] 10–2M solution. Due to the large value of Kf and the substantial excess of [latex]\ce{NH3}[/latex], it can be assumed that the reaction goes to completion with only a small amount of the complex dissociating to form the ions. After reaction, concentrations of the species in the solution are

[NH3] = 6.00 [latex]\times[/latex] 10–2 mol/L – 1.6 [latex]\times[/latex] 10–2 mol L–1 = 4.4 [latex]\times[/latex] 10–2M

Let x be the change in concentration of [latex]\ce{[Cd^2+]}[/latex]:

[Cd(NH3)42+] [Cd2+] [NH3]
Initial concentration (M) 4.00 × 10−3 0 4.4 × 10−2
Equilibrium (M) 4.00 × 10−3x x 4.4 × 10−2 + 4x

[latex]{K}_{\text{f}}=4.0\times {10}^{6}=\frac{\left[\ce{Cd}{\left({\ce{NH}}_{3}\right)}_{4}{}^{\ce{2+}}\right]}{\left[{\ce{Cd}}^{\ce{2+}}\right]{\left[{\ce{NH}}_{3}\right]}^{4}}[/latex]

[latex]4.00\times {10}^{6}=\frac{\left(4.00\times {10}^{-3}-x\right)}{\left(x\right){\left(4.4\times {10}^{-2}+4x\right)}^{4}}[/latex]

As x is expected to be about the same size as the number from which it is subtracted, the entire expression must be expanded and solved, in this case, by successive approximations where substitution of values for x into the equation continues until the remainder is judged small enough. This is a slightly different method than used in most problems. We have:

4.0 [latex]\times[/latex] 106x (4.4 [latex]\times[/latex] 10–2 + 4x)4 = 4.00 [latex]\times[/latex] 10–3x

4.0 [latex]\times[/latex] 106x (3.75 [latex]\times[/latex] 10–6 + 1.36 [latex]\times[/latex] 10–3x + 0.186x2 + 11.264x3 +256x4) = 4.00 [latex]\times[/latex] 10–3

16x + 5440x2 + 7.44 [latex]\times[/latex] 105x3 + 4.51 [latex]\times[/latex] 107x4 + 1.024 [latex]\times[/latex] 109x 5 = 4.00 [latex]\times[/latex] 10–3

Substitution of different values x will give a number to be compared with 4.00 [latex]\times[/latex] 10–3. Using 2.50 [latex]\times[/latex] 10–4 for x gives 4.35 [latex]\times[/latex] 10–3 compared with 4.00 [latex]\times[/latex] 10–3. Using 2.40 [latex]\times[/latex] 10–4 gives 4.16 [latex]\times[/latex] 10–3 compared with 4.00 [latex]\times[/latex] 10–3. Using 2.30 [latex]\times[/latex] 10–4 gives 3.98 [latex]\times[/latex] 10–3 compared with 4.00 [latex]\times[/latex] 10–3. Thus 2.30 [latex]\times[/latex] 10–4 is close enough to the true value of x to make the difference equal to zero. If the approximation to drop 4x is compared with 4.4 [latex]\times[/latex] 10–2, the value of x obtained is 2.35 [latex]\times[/latex] 10–4M.

5.

[Cd(CN)42−] [CN] [Cd2+]
Initial concentration (M) 0.250 0 0
Equilibrium (M) 0.250 − x 4x x

[latex]{K}_{\text{d}}=\frac{\left[{\ce{Cd}}^{\ce{2+}}\right]\left[{\ce{CN}}^{-}\right]}{\left[\ce{Cd}{\left(\ce{CN}\right)}_{4}{}^{2-}\right]}=7.8\times {10}^{-18}=\frac{x{\left(4x\right)}^{4}}{0.250-x}[/latex]

Assume that x is small when compared with 0.250 M.

256x5 = 0.250 [latex]\times[/latex] 7.8 [latex]\times[/latex] 10–18

x5 = 7.617 [latex]\times[/latex] 10–21

x = [latex]\ce{[Cd^2+]}[/latex] = 9.5 [latex]\times[/latex] 10–5M

4x =[latex]\ce{[CN-]}[/latex] = 3.8 [latex]\times[/latex] 10–4M

7.

[latex]\ce{[Co(NH3)6^3+]}[/latex] [latex]\ce{[Co^3+]}[/latex] [latex]\ce{[NH3]}[/latex]
Initial concentration (M) 0.500 0 0
Equilibrium (M) 0.500 − x x 6x

[latex]{K}_{\text{d}}=\frac{\left[{\ce{Co}}^{\ce{2+}}\right]{\left[{\ce{NH}}_{3}\right]}^{6}}{\left[\ce{Co}{\left({\ce{NH}}_{3}\right)}_{6}{}^{\ce{3+}}\right]}=\frac{x{\left(6x\right)}^{6}}{0.500-x}=2.2\times {10}^{-34}[/latex]

Assume that x is small when compared with 0.500 M.

4.67 [latex]\times[/latex] 104x7 = 0.500 [latex]\times[/latex] 2.2 [latex]\times[/latex] 10–34

x7 = 2.358 [latex]\times[/latex] 10–39

x = [latex]\ce{[Co^3+]}[/latex] = 3.0 [latex]\times[/latex] 10–6M

6x = [latex]\ce{[NH3]}[/latex] = 1.8 [latex]\times[/latex] 10–5M

13. The reaction is governed by two equilibria, both of which must be satisfied:

[latex]\begin{array}{l}\ce{AgBr}\left(s\right)\rightleftharpoons\ce{Ag}^{+}\left(aq\right)+\ce{Br}^{-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{sp}}=3.3\times{10}^{-13}\\\ce{Ag}^{+}\left(aq\right)+2{\ce{S}}_2\ce{O}_{3}^{2-}\left(aq\right)\rightleftharpoons\ce{Ag}\left(\ce{S}_{2}\text{O}_{3}\right)_{2}^{3-}\left(aq\right)\,\,\,\,\,\,\,{;}\,\,\,\,\,\,\,{K}_{\text{f}}=4.7\times{10}^{13}\end{array}[/latex]

The overall equilibrium is obtained by adding the two equations and multiplying their Ks:

[latex]\frac{\left[\ce{Ag}{\left({\ce{S}}_{2}{\ce{O}}_{3}\right)}^{\ce{3-}}\right]\left[{\ce{Br}}^{-}\right]}{{\left[{\ce{S}}_{2}{\ce{O}}_{3}{}^{2-}\right]}^{2}}=15.51[/latex]

If all [latex]\ce{Ag}[/latex] is to be dissolved, the concentration of the complex is the molar concentration of [latex]\ce{AgBr}[/latex].

formula mass ([latex]\ce{AgBr}[/latex]) = 187.772 g/mol

[latex]\text{moles present}=\frac{0.27\text{g}\ce{AgBr}}{187.772\text{g}{\text{mol}}^{-1}}=1.438\times {10}^{-3}\text{mol}[/latex]

Let x be the change in concentration of [latex]\ce{S2O3^2-}:[/latex]

[latex]\ce{[Ag+]}[/latex] [latex]\ce{[S2O3^2-]}[/latex]
Initial concentration (M) 0 0
Equilibrium (M) [latex]\frac{1}{2}x[/latex] x

[latex]\frac{\left(1.438\times {10}^{-3}\right)\left(1.438\times {10}^{-3}\right)}{{x}^{2}}=15.51[/latex]

x2 = 1.333 [latex]\times[/latex] 10–7

[latex]x=3.65\times {10}^{-4}M=\ce{[S2O3^2-]}[/latex]

The formula mass of [latex]\ce{Na2S2O3•5H2O}[/latex] is 248.13 g/mol. The total [latex]\ce{[S2O3^2-]}[/latex] needed is:

2(1.438 [latex]\times[/latex] 10–3) + 3.65 [latex]\times[/latex] 10–4 = 3.241 [latex]\times[/latex] 10–3 mol

g(hypo) = 3.241 [latex]\times[/latex] 10–3 mol [latex]\times[/latex] 248.13 g/mol = 0.80 g

11.

(a)

This figure represents a chemical reaction in two rows. The top row shows the reaction using chemical formulas. The second row uses structural formulas to represent the reaction. The first row contains the equation H C l ( g ) plus P H subscript 3 ( g ) right pointing arrow left bracket P H subscript 4 right bracket superscript plus plus left bracket C l with 4 pairs of electron dots right bracket superscript negative sign. The second row begins on the left with H left bracket C l with four unshared electron pairs right bracket plus a structure in brackets with a central P atom with H atoms single bonded at the left, above, and to the right. A single unshared electron pair is on the central P atom. Outside the brackets to the right is a superscript plus sign. Following a right pointing arrow is a structure in brackets with a central P atom with H atoms single bonded at the left, above, below, and to the right. Outside the brackets is a superscript plus sign. This structure is followed by a plus and a C l atom in brackets with four unshared electron pairs and a superscript negative sign.

(b) [latex]\ce{H3O+}+\ce{CH3-}\longrightarrow \ce{CH4}+\ce{H2O}[/latex]

This figure represents a chemical reaction using structural formulas. A structure is shown in brackets on the left which is composed of a central O atom with one unshared electron pair and three single bonded H atoms to the left, right, and above the atom. Outside the brackets to the right is a superscript plus sign. Following a plus sign, is another structure in brackets composed of a central C atom with one unshared electron pair and three single bonded H atoms to the left, right, and above the atom. Outside the brackets to the right is a superscript negative sign. Following a right pointing arrow is a structure with a central C atom with H atoms single bonded above, below, left and right. Following a plus sign is a structure with a central O atom with two unshared electron pairs and two H atoms connected with single bonds.

(c) [latex]\ce{CaO}+\ce{SO3}\longrightarrow \ce{CaSO4}[/latex]

This figure represents a chemical reaction using structural formulas. On the left, C a superscript 2 plus is just left of bracket O with four unshared electron pairs right bracket superscript 2 negative plus a structure with a central S atom to which two O atoms are single bonded at the left and right, and a single O atom is double bonded above. The two single bonded O atoms each have three unshared electron pairs and the double bonded O atom has two unshared electron pairs. Following a right pointing arrow is C a superscript 2 plus just left of a structure in brackets with a central S atom which has 4 O atoms single bonded at the left, above, below, and to the right. Each of the O atoms has three unshared electron pairs. Outside the brackets to the right is a superscript two negative.

(d) [latex]\ce{NH4+}+\ce{C2H5O-}\longrightarrow \ce{C2H5OH}+\ce{NH3}[/latex]

This figure represents a chemical reaction using structural formulas. A structure is shown in brackets on the left which is composed of a central N atom with four single bonded H atoms to the left, right, above, and below the atom. Outside the brackets to the right is a superscript plus sign. Following a plus sign, is another structure in brackets composed of a C atom with three single bonded H atoms above, below, and to the left. A second C atom is single bonded to the right. This C atom has H atoms single bonded above and below. To the right of the second C atom, an O atom is single bonded. This O atom has three unshared electron pairs. Outside the brackets to the right is a subperscript negative. Following a right pointing arrow is a structure composed of a C atom with three single bonded H atoms above, below, and to the left. A second C atom is single bonded to the right. This C atom has H atoms single bonded above and below. To the right of the second C atom, an O atom is single bonded. This O atom has two unshared electron pairs and an H atom single bonded to its right.

19. The equilibrium is:[latex]\ce{Ag+}(aq)+\ce{2CN-}(aq)\rightleftharpoons \ce{Ag(CN)2-}(aq){K}_{\text{f}}=1\times {10}^{20}[/latex]

The number of moles of [latex]\ce{AgNO3}[/latex] added is:

0.02872 L [latex]\times[/latex] 0.0100 mol/L = 2.87 [latex]\times[/latex] 10–4 mol

This compound reacts with [latex]\ce{CN-}[/latex] to form [latex]\ce{Ag(CN)2-}[/latex], so there are 2.87 [latex]\times[/latex] 10–4 mol [latex]\ce{Ag(CN)2-}[/latex]. This amount requires 2 [latex]\times[/latex] 2.87 [latex]\times[/latex] 10–4 mol, or 5.74 [latex]\times[/latex] 10–4 mol, of [latex]\ce{CN-}[/latex]. The titration is stopped just as precipitation of [latex]\ce{AgCN}[/latex] begins:

[latex]\ce{AgCN2-}(aq)+\ce{Ag+}(aq)\rightleftharpoons \ce{2AgCN}(s)[/latex]

so only the first equilibrium is applicable. The value of Kf is very large.

mol [latex]\ce{CN-} < \ce{[Ag(CN)2-]}[/latex] mol [latex]\ce{NaCN}[/latex] = 2 mol [ [latex]\ce{Ag(CN)2-}[/latex] ] = 5.74 [latex]\times[/latex] 10–4 mol

[latex]\text{mass}(\ce{NaCN})=5.74\times {10}^{-4}\text{mol}\times \frac{49.007\text{g}}{1\text{mol}}=0.0281\text{g}[/latex]

21. [latex]\ce{HNO3}(l)+\ce{HF}(l)\longrightarrow \ce{H2NO3+}+\ce{F-}[/latex]; [latex]\ce{HF}(l)+\ce{BF3}(g)\longrightarrow \ce{H+}+\ce{BF4}[/latex]

23. (a) [latex]\ce{H3BO3}+\ce{H2O}\longrightarrow \ce{H4BO4-}+\ce{H+}[/latex];

(b) First, form a symmetrical structure with the unique atom, B, as the central atom. Then include the 32e to form the Lewis structure:

An H atom is bonded to an O atom. The O atom has 2 dots above it and 2 dots below it. The O atom is bonded to a B atom, which has three additional O atoms bonded to it as well. Each of these additional O atoms has 4 dots arranged around it, and is bonded to an H atom. This entire molecule is contained in brackets, to the right of which is a superscripted negative sign.

Because there are four bonds and no lone pair (unshared pair) on B, the electronic and molecular shapes are the same—both tetrahedral.

(c) The tetrahedral structure is consistent with sp3 hybridization.

[/hidden-answer]

16.3 Coupled Equilibria

  1. A saturated solution of a slightly soluble electrolyte in contact with some of the solid electrolyte is said to be a system in equilibrium. Explain. Why is such a system called a heterogeneous equilibrium?
  2. Calculate the equilibrium concentration of [latex]\ce{Zn^2+}[/latex] in a 0.30-M solution of [latex]\ce{Zn(CN)4^2-}[/latex].
  3. Calculate the equilibrium concentration of [latex]\ce{Zn^2+}[/latex] in a solution initially with 0.150 M [latex]\ce{Zn^2+}[/latex] and 2.50 M [latex]\ce{CN-}[/latex].
  4. Calculate the [latex]\ce{Co^2+}[/latex] equilibrium concentration when 0.100 mole of [latex]\ce{[Co(NH3)6](NO3)2}[/latex] is added to a solution with 0.025 M [latex]\ce{NH3}[/latex]. Assume the volume is 1.00 L.
  5. Calculate the molar solubility of [latex]\ce{Sn(OH)2}[/latex] in a buffer solution containing equal concentrations of [latex]\ce{NH3}[/latex] and [latex]\ce{NH4+}[/latex].
  6. What is the molar solubility of [latex]\ce{CaF2}[/latex] in a 0.100-M solution of [latex]\ce{HF}[/latex]? Ka for [latex]\ce{HF}[/latex] = 7.2 [latex]\times[/latex] 10–4.
  7. What is the molar solubility of [latex]\ce{BaSO4}[/latex] in a 0.250-M solution of [latex]\ce{NaHSO4}[/latex]? Ka for [latex]\ce{HSO4-}[/latex] = 1.2 [latex]\times[/latex] 10–2.
  8. What is the molar solubility of [latex]\ce{Tl(OH)3}[/latex] in a 0.10-M solution of [latex]\ce{NH3}[/latex]?
  9. What is the molar solubility of [latex]\ce{Pb(OH)2}[/latex] in a 0.138-M solution of [latex]\ce{CH3NH2}[/latex]?
  10. A solution of 0.075 M [latex]\ce{CoBr2}[/latex] is saturated with [latex]\ce{H2S}[/latex] ([latex]\ce{[H2S]}[/latex] = 0.10 M). What is the minimum pH at which [latex]\ce{CoS}[/latex] begins to precipitate?
    [latex]\ce{CoS}(s)\rightleftharpoons \ce{Co^2+}(aq)+\ce{S^2-}(aq){K}_{\text{sp}}=4.5\times {10}^{-27}[/latex][latex]\ce{H2S}(aq)+\ce{2H2O}(l)\rightleftharpoons \ce{2H3O+}(aq)+\ce{S^2-}(aq)K=1.0\times {10}^{\text{-26}}[/latex]
  11. A 0.125-M solution of [latex]\ce{Mn(NO3)2}[/latex] is saturated with [latex]\ce{H2S}[/latex] ([latex]\ce{[H2S]}[/latex] = 0.10 M). At what pH does MnS begin to precipitate?[latex]\ce{MnS}(s)\rightleftharpoons \ce{Mn^2+}(aq)+\ce{S^2-}(aq){K}_{\text{sp}}=4.3\times {10}^{-22}[/latex][latex]\ce{H2S}(aq)+\ce{2H2O}(l)\rightleftharpoons \ce{2H3O+}(aq)+\ce{S^2-}(aq)K=1.0\times {10}^{-26}[/latex]
  12. Calculate the molar solubility of [latex]\ce{BaF2}[/latex] in a buffer solution containing 0.20 M [latex]\ce{HF}[/latex] and 0.20 M [latex]\ce{NaF}[/latex].
  13. Calculate the molar solubility of [latex]\ce{CdCO3}[/latex] in a buffer solution containing 0.115 M [latex]\ce{Na2CO3}[/latex] and 0.120 M [latex]\ce{NaHCO3}[/latex]
  14. To a 0.10-M solution of [latex]\ce{Pb(NO3)2}[/latex] is added enough [latex]\ce{HF}[/latex](g) to make [latex]\ce{[HF]}[/latex] = 0.10 M.
    1. Does [latex]\ce{PbF2}[/latex] precipitate from this solution? Show the calculations that support your conclusion.
    2. What is the minimum pH at which [latex]\ce{PbF2}[/latex] precipitates?
  15. Calculate the concentration of [latex]\ce{Cd^2+}[/latex] resulting from the dissolution of [latex]\ce{CdCO3}[/latex] in a solution that is 0.250 M in [latex]\ce{CH3CO2H}[/latex], 0.375 M in [latex]\ce{NaCH3CO2}[/latex], and 0.010 M in [latex]\ce{H2CO3}[/latex].
  16. Both [latex]\ce{AgCl}[/latex] and [latex]\ce{AgI}[/latex] dissolve in [latex]\ce{NH3}[/latex].
    1. What mass of [latex]\ce{AgI}[/latex] dissolves in 1.0 L of 1.0 M [latex]\ce{NH3}[/latex]?
    2. What mass of [latex]\ce{AgCl}[/latex] dissolves in 1.0 L of 1.0 M [latex]\ce{NH3}[/latex]?
  17. Calculate the volume of 1.50 M [latex]\ce{CH3CO2H}[/latex] required to dissolve a precipitate composed of 350 mg each of [latex]\ce{CaCO3}[/latex], [latex]\ce{SrCO3}[/latex], and [latex]\ce{BaCO3}[/latex].
  18. Even though [latex]\ce{Ca(OH)2}[/latex] is an inexpensive base, its limited solubility restricts its use. What is the pH of a saturated solution of [latex]\ce{Ca(OH)2}[/latex]?
  19. What mass of [latex]\ce{NaCN}[/latex] must be added to 1 L of 0.010 M [latex]\ce{Mg(NO3)2}[/latex] in order to produce the first trace of [latex]\ce{Mg(OH)2}[/latex]?
  20. Magnesium hydroxide and magnesium citrate function as mild laxatives when they reach the small intestine. Why do magnesium hydroxide and magnesium citrate, two very different substances, have the same effect in your small intestine. (Hint: The contents of the small intestine are basic.)
  21. The following question is taken from a Chemistry Advanced Placement Examination and is used with the permission of the Educational Testing Service. Solve the following problem: [latex]\ce{MgF2}(s)\rightleftharpoons \ce{Mg^2+}(aq)+\ce{2F-}(aq)[/latex]In a saturated solution of [latex]\ce{MgF2}[/latex] at 18 °C, the concentration of [latex]\ce{Mg^2+}[/latex] is 1.21 [latex]\times[/latex] 10–3M. The equilibrium is represented by the equation above.
    1. Write the expression for the solubility-product constant, Ksp, and calculate its value at 18 °C.
    2. Calculate the equilibrium concentration of [latex]\ce{Mg^2+}[/latex] in 1.000 L of saturated [latex]\ce{MgF2}[/latex] solution at 18 °C to which 0.100 mol of solid [latex]\ce{KF}[/latex] has been added. The [latex]\ce{KF}[/latex] dissolves completely. Assume the volume change is negligible.
    3. Predict whether a precipitate of [latex]\ce{MgF2}[/latex] will form when 100.0 mL of a 3.00 [latex]\times[/latex] 10–3M solution of [latex]\ce{Mg(NO3)2}[/latex] is mixed with 200.0 mL of a 2.00 [latex]\times[/latex] 10–3M solution of [latex]\ce{NaF}[/latex] at 18 °C. Show the calculations to support your prediction.
    4. At 27 °C the concentration of [latex]\ce{Mg^2+}[/latex] in a saturated solution of [latex]\ce{MgF2}[/latex] is 1.17 [latex]\times[/latex] 10–3M. Is the dissolving of [latex]\ce{MgF2}[/latex] in water an endothermic or an exothermic process? Give an explanation to support your conclusion.
  22. Which of the following compounds, when dissolved in a 0.01-M solution of [latex]\ce{HClO4}[/latex], has a solubility greater than in pure water: [latex]\ce{AgBr}[/latex], [latex]\ce{BaF2}[/latex], [latex]\ce{Ca3(PO4)3}[/latex], [latex]\ce{ZnS}[/latex], [latex]\ce{PbI2}[/latex]? Explain your answer.
  23. What is the effect on the amount of solid [latex]\ce{Mg(OH)2}[/latex] that dissolves and the concentrations of [latex]\ce{Mg^2+}[/latex] and [latex]\ce{OH-}[/latex] when each of the following are added to a mixture of solid [latex]\ce{Mg(OH)2}[/latex] and water at equilibrium?
    1. [latex]\ce{MgCl2}[/latex]
    2. [latex]\ce{KOH}[/latex]
    3. [latex]\ce{HClO4}[/latex]
    4. [latex]\ce{NaNO3}[/latex]
    5. [latex]\ce{Mg(OH)2}[/latex]
  24. What is the effect on the amount of [latex]\ce{CaHPO4}[/latex] that dissolves and the concentrations of [latex]\ce{Ca^2+}[/latex] and [latex]\ce{HPO4-}[/latex] when each of the following are added to a mixture of solid [latex]\ce{CaHPO4}[/latex] and water at equilibrium?
    1. [latex]\ce{CaCl2}[/latex]
    2. [latex]\ce{HCl}[/latex]
    3. [latex]\ce{KClO4}[/latex]
    4. [latex]\ce{NaOH}[/latex]
    5. [latex]\ce{CaHPO4}[/latex]
  25. Identify all chemical species present in an aqueous solution of [latex]\ce{Ca3(PO4)2}[/latex] and list these species in decreasing order of their concentrations. (Hint: Remember that the [latex]\ce{PO4^3-}[/latex] ion is a weak base.)
  26. A volume of 50 mL of 1.8 M [latex]\ce{NH3}[/latex] is mixed with an equal volume of a solution containing 0.95 g of [latex]\ce{MgCl2}[/latex]. What mass of [latex]\ce{NH4Cl}[/latex] must be added to the resulting solution to prevent the precipitation of [latex]\ce{Mg(OH)2}[/latex]?

[reveal-answer q=”348957″]Show Selected Solutions[/reveal-answer]
[hidden-answer a=”348957″]

7. Find the amount of [latex]{\text{SO}}_{4}{}^{2-}[/latex] present from Ka for the equilibrium:

[latex]{\text{HSO}}_{4}{}^{-}+{\text{H}}_{2}\text{O}\longrightarrow {\text{H}}_{3}{\text{O}}^{+}+{\text{SO}}_{4}{}^{2-}[/latex]

Let x be the change in [latex]\left[{\text{SO}}_{4}{}^{2-}\right][/latex] :

[latex]{K}_{\text{a}}=\frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]\left[{\text{SO}}_{4}{}^{2-}\right]}{\left[{\text{HSO}}_{4}{}^{-}\right]}=\frac{{x}^{2}}{0.250-x}=1.2\times {10}^{-2}[/latex]

Because Ka is too large to disregard x in the expression 0.250 – x, we must solve the quadratic equation:

x2 + 1.2 [latex]\times[/latex] 10–2x – 0.250(1.2 [latex]\times[/latex] 10–2) = 0

[latex]x=\frac{-1.2\times {10}^{-2}\pm \sqrt{{\left(1.2\times {10}^{-2}\right)}^{2}+4\left(3.0\times {10}^{\text{-3}}\right)}}{2}=\frac{-1.2\times {10}^{-2}\pm 0.11}{2}=0.049M[/latex]

Ksp = [Ba2+] [latex]\left[{\text{SO}}_{4}{}^{2-}\right][/latex] = [Ba2+](0.049) = 1.08 [latex]\times[/latex] 10–10

[Ba2+] = 2.2 [latex]\times[/latex] 10–9 (molar solubility)

9. [latex]{\text{CH}}_{3}{\text{NH}}_{2}+{\text{H}}_{2}\text{O}\rightleftharpoons {\text{CH}}_{3}{\text{NH}}_{3}{}^{+}+{\text{OH}}^{-}[/latex]

[latex]{K}_{\text{b}}=\frac{\left[{\text{CH}}_{3}{\text{NH}}_{3}{}^{+}\right]\left[{\text{OH}}^{-}\right]}{\left[{\text{CH}}_{3}{\text{NH}}_{2}\right]}=\frac{\left(x\right)\left(x\right)}{0.138-x}=4.4\times {10}^{-4}[/latex]

Solve the quadratic equation using the quadratic formula:

x2 + 4.4 [latex]\times[/latex] 10–4x – 0.138(4.4 [latex]\times[/latex] 10–4) = 0

[latex]x=\frac{-4.4\times {10}^{-4}\pm \sqrt{{\left(4.4\times {10}^{-4}\right)}^{2}+4\left(6.07\times {10}^{\text{-5}}\right)}}{2}=\frac{-4.4\times {10}^{\text{-4}}\pm \sqrt{2.43\times {10}^{-4}}}{2}=\frac{0.0152}{2}=7.6\times {10}^{-3}M[/latex]

Ksp = [Pb2+][OH]2 = [Pb2+](7.6 [latex]\times[/latex] 10–3)2 = 2.8 [latex]\times[/latex] 10–16

[Pb2+] = 4.8 [latex]\times[/latex] 10–12 (molar solubility)

11. Two equilibria are in competition for the ions and must be considered simultaneously. Precipitation of [latex]\ce{MnS}[/latex] will occur when the concentration of [latex]\ce{S^2-}[/latex] in conjunction with 0.125 M Mn2+ exceeds the Ksp of MnS. The [latex]\ce{[S^2-}]}[/latex] must come from the ionization of [latex]\ce{H2S}[/latex] as defined by the equilibrium:

[latex]{\text{H}}_{2}\text{S}\left(aq\right)+2{\text{H}}_{2}\text{O}\left(l\right)\longrightarrow 2{\text{H}}_{3}{\text{O}}^{\text{+}}\left(aq\right)+{\text{S}}^{2-}\left(aq\right)[/latex]

[latex]\frac{{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}^{2}\left[{\text{S}}^{2-}\right]}{\left[{\text{H}}_{2}\text{S}\right]}={K}_{1}{K}_{2}\left({\text{H}}_{2}\text{S}\right)=1.0\times {10}^{\text{-26}}[/latex]

As a saturated solution of [latex]\ce{H2S}[/latex] is 0.10 M, this later expression becomes:

[latex]{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}^{2}\left[{\text{S}}^{2-}\right]=1.0\times {10}^{-27}[/latex]

From the equilibrium of [latex]\ce{MnS}[/latex], the minimum concentration of [latex]\ce{S^2-}[/latex] required to cause precipitation is calculated as:

[latex]\text{MnS}\left(s\right)\longrightarrow {\text{Mn}}^{\text{2+}}\left(aq\right)+{\text{S}}^{2-}\left(aq\right)[/latex]

Ksp = [latex]\ce{[Mn^2+][S2-]}[/latex] = 4.3 [latex]\times[/latex] 10–22

[latex]\left[{\text{S}}^{2-}\right]=\frac{4.3\times {10}^{-22}}{0.125}=3.44\times {10}^{-21}[/latex]

This amount of [latex]\ce{S^2-}[/latex] will exist in solution at a pH defined by the [latex]\ce{H2S}[/latex] equilibrium:

  • [latex]{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}^{2}\left(3.44\times {10}^{-21}\right)=1.0\times {10}^{-27}[/latex]
  • [latex]{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}^{2}=2.91\times {10}^{-7}[/latex]
  • [latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right]=5.39\times {10}^{-4}M[/latex]
  • [latex]\text{pH}=-\text{log}\left[{\text{H}}_{3}{\text{O}}^{+}\right]=3.27[/latex]

13. Three equilibria are involved:

  • [latex]{\text{H}}_{2}{\text{CO}}_{3}+{\text{H}}_{2}\text{O}\longrightarrow {\text{H}}_{3}{\text{O}}^{+}+{\text{HCO}}_{3}{}^{-}{K}_{{\text{a}}_{1}}=4.3\times {10}^{-7}[/latex]
  • [latex]{\text{HCO}}_{3}{}^{-}+{\text{H}}_{2}\text{O}\longrightarrow {\text{H}}_{3}{\text{O}}^{+}+{\text{CO}}_{3}{}^{2-}{K}_{{\text{a}}_{2}}=7\times {10}^{-11}[/latex]
  • [latex]{\text{CdCO}}_{3}\longrightarrow {\text{Cd}}^{\text{2+}}+{\text{CO}}_{3}{}^{2-}{K}_{\text{sp}}=2.5\times {10}^{-14}[/latex]

First, find the pH of the buffer from the Henderson-Hasselbach equation. Then find [latex]\ce{[H3O+]}[/latex]:

[latex]\text{pH}=\text{p}{K}_{\text{a}}+\mathrm{log}\frac{\left[{\text{CO}}_{3}{}^{2-}\right]}{\left[{\text{HCO}}_{3}{}^{-}\right]}[/latex]

10.155 + log [latex]\frac{0.115}{0.120}[/latex] = 10.155 – 0.018 = 10.137

In this case, several more significant figures are carried than justified so that the value of the log ratio is meaningful:

[latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right]=7.3\times {10}^{-11}[/latex]

Now, find the concentration of [latex]{\text{CO}}_{3}{}^{2-}[/latex] present in the buffer solution. Next, using [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] and Ksp, calculate the concentration of [latex]\ce{Cd^2+}[/latex]. This latter value represents the molar solubility. From [latex]{K}_{{a}_{1}}[/latex] determine [latex]\ce{[H2CO3]}[/latex]:

[latex]{K}_{{\text{a}}_{1}}=4.3\times {10}^{-7}=\frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]\left[{\text{HCO}}_{3}{}^{-}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}=\frac{\left(7.3\times {10}^{-11}\right)\left(0.120\right)}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}[/latex]

[H2CO3] = 2.05 [latex]\times[/latex] 10–5

From [latex]{K}_{{\text{a}}_{1}}{K}_{{\text{a}}_{2}}[/latex] , find the concentration of [latex]{\text{CO}}_{3}{}^{2-}[/latex] :

[latex]\begin{array}{rll}{}{K}_{{\text{a}}_{1}}{K}_{{\text{a}}_{2}}&=&\left(4.3\times 10 - 7\right)\left(7\times 10 - 11\right)=\frac{\left[{\text{HCO}}_{3}{}^{-}\right]\left[{\text{H}}_{3}{\text{O}}^{+}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}\times \frac{\left[{\text{CO}}_{3}{}^{2-}\right]\left[{\text{H}}_{3}{\text{O}}^{+}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}=\frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]\left[{\text{CO}}_{3}{}^{2-}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}=\frac{{\left(7.3\times {10}^{-11}\right)}^{2}\times \left[{\text{CO}}_{3}{}^{2-}\right]}{2.04\times {10}^{-5}}\\& =&3\times {10}^{-17}\end{array}[/latex]

[latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] = 0.115 M

Ksp = [latex]\ce{[Cd^2+]}[/latex] [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] = [Cd2+](0.115) = 3 [latex]\times[/latex] 10–13

[latex]\left[{\text{Cd}}^{\text{2+}}\right]=\frac{3\times {10}^{-13}}{0.115}=3\times {10}^{-12}M[/latex]

15. For Ksp, (CdCO3) = [Cd2+] [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] = 2.5 [latex]\times[/latex] 10–14, the amount of [latex]{\text{CO}}_{3}{}^{2-}[/latex] is governed by Ka of H2CO3, 4.3 [latex]\times[/latex] 10–7, and Ka of [latex]{\text{HCO}}_{3}{}^{-}[/latex] , 7 [latex]\times[/latex] 10–11, and [latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right][/latex] by Ka of acetic acid. First, calculate the [latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right][/latex] from Ka of acetic acid (HOAc):

[latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right]=\frac{{K}_{\text{a}}\left[\text{HOAc}\right]}{\left[{\text{OAc}}^{-}\right]}=\frac{1.8\times {10}^{-5}\left(0.250\right)}{\left(0.375\right)}=1.2\times {10}^{-5}M[/latex]

From this and Ka for [latex]\ce{H2CO3}[/latex], calculate [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] present. As [latex]\left[{\text{H}}_{3}{\text{O}}^{+}\right][/latex] is fixed by Ka of acetic acid:

[latex]{K}_{\text{a}}\left({\text{H}}_{2}{\text{CO}}_{3}\right)=\frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]\left[{\text{HCP}}_{3}{}^{-}\right]}{\left[{\text{H}}_{2}{\text{CO}}_{3}{}^{-}\right]}[/latex]

[latex]\left[{\text{H}}_{2}{\text{CO}}_{3}{}^{-}\right]=\frac{{K}_{\text{a}}\left[{\text{H}}_{2}{\text{CO}}_{3}\right]}{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}=\frac{4.3\times {10}^{-7}\left[0.010\right]}{\left[1.2\times {10}^{-5}\right]}=3.58\times {10}^{-4}M[/latex]

From [latex]{K}_{\text{a}}\left({\text{HCO}}_{3}{}^{-}\right)[/latex] we obtain [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] :

[latex]{K}_{a}=7\times {10}^{-11}=\frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]\left[{\text{CO}}_{3}{}^{2-}\right]}{\left[{\text{HCO}}_{3}{}^{-}\right]}=\frac{1.2\times {10}^{-17}\left[{\text{CO}}_{3}{}^{2-}\right]}{\left[3.58\times {10}^{-4}\right]}\text{ }[/latex]

[latex]\left[{\text{CO}}_{3}{}^{2-}\right]=\frac{7\times {10}^{-11}\times 3.58\times {10}^{-4}}{1.2\times {10}^{-5}}=2.09\times {10}^{-9}[/latex]

From the solubility product:

Ksp = [Cd2+] [latex]\left[{\text{CO}}_{3}{}^{2-}\right][/latex] = 2.5 [latex]\times[/latex] 10–14 = Cd2+ (2.09 [latex]\times[/latex] 10–9)

[latex]\left[{\text{Cd}}^{\text{2+}}\right]=\frac{2.5\times {10}^{-14}}{2.09\times {10}^{-9}}=1\times {10}^{-5}M[/latex]

17. [latex]{\text{CaCO}}_{3}:0.350\cancel{\text{g}}\times \frac{1\text{mol}}{100.09\cancel{\text{g}}}=3.50\times {10}^{-3}\text{mol}[/latex]

[latex]{\text{SrCO}}_{3}:0.350\cancel{\text{g}}\times \frac{1\text{mol}}{147.63\cancel{\text{g}}}=2.37\times {10}^{-3}\text{mol}[/latex]

[latex]{\text{BaCO}}_{3}:0.350\cancel{\text{g}}\times \frac{1\text{mol}}{197.34\cancel{\text{g}}}=1.77\times {10}^{-3}\text{mol}[/latex]

  • Total: 7.64 [latex]\times[/latex] 10–3 mol
  • [latex]\ce{CaCO3}[/latex]: Ksp = 4.8 [latex]\times[/latex] 10–9
  • [latex]\ce{SrCO3}[/latex]: Ksp = 9.42 [latex]\times[/latex] 10–10
  • [latex]\ce{BaCO3}[/latex]: Ksp = 8.1 [latex]\times[/latex] 10–9

Solubilities are approximately equal.

When the three solids dissolve, 7.64 [latex]\times[/latex] 10–3 mol of metal ions and 7.64 [latex]\times[/latex] 10–3 mol of [latex]{\text{CO}}_{3}{}^{2-}[/latex] are initially present. The [latex]{\text{CO}}_{3}{}^{2-}[/latex] reacts with [latex]\ce{CH3CO2H}[/latex] to form [latex]{\text{HCO}}_{3}{}^{-}[/latex] :

[latex]{\text{ CO}}_{3}{}^{2-}\left(aq\right)+{\text{CH}}_{3}{\text{CO}}_{2}\text{H}\left(aq\right)\rightleftharpoons {\text{HCO}}_{3}{}^{-}\left(aq\right)+{\text{CH}}_{3}{\text{CO}}_{2}{}^{-}\left(aq\right)[/latex]

[latex]K=\frac{\left[{\text{HCO}}_{3}{}^{-}\right]\left[{\text{CH}}_{3}{\text{CO}}_{2}{}^{-}\right]}{\left[{\text{CO}}_{3}{}^{2-}\right]\left[{\text{CH}}_{3}{\text{CO}}_{2}\text{H}\right]}\times \frac{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}{\left[{\text{H}}_{3}{\text{O}}^{+}\right]}=\frac{{K}_{\text{a}}\left(\text{for}{\text{CH}}_{3}{\text{CO}}_{2}\text{H}\right)}{{K}_{\text{a}}\left(\text{for}{\text{HCO}}_{3}{}^{-}\right)}=\frac{1.8\times {10}^{-5}}{7\times {10}^{-11}}=2.6\times {10}^{5}[/latex]

This K value is large, so virtually all [latex]{\text{CO}}_{3}{}^{2-}[/latex] undergoes this reaction and approximately 7.64 [latex]\times[/latex] 10–3 mol of [latex]{\text{HCO}}_{3}{}^{-}[/latex] forms. The [latex]{\text{HCO}}_{3}{}^{-}[/latex] reacts with CH3CO2H:

[latex]{\text{HCO}}_{3}{}^{-}\left(aq\right)+{\text{CH}}_{3}{\text{CO}}_{2}\text{H}\left(aq\right)\longrightarrow {\text{H}}_{2}{\text{CO}}_{3}\left(aq\right)+{\text{CH}}_{3}{\text{CO}}_{2}{}^{-}\left(aq\right)[/latex]

[latex]K=\frac{{K}_{\text{a}}\left(\text{for}{\text{CH}}_{3}{\text{CO}}_{2}\text{H}\right)}{{K}_{\text{a}}\left(\text{for}{\text{HCO}}_{3}{}^{-}\right)}=\frac{1.8\times {10}^{-5}}{4.3\times {10}^{-7}}=42[/latex]

This reaction is virtually complete as well (K is large).

For each mol of [latex]{\text{CO}}_{3}{}^{2-}[/latex] produced, 2 mol of [latex]\ce{CH3CO2H}[/latex] is required for conversion to [latex]\ce{H2CO3}[/latex]. Thus 15.3 [latex]\times[/latex] 10–3 mol [latex]\ce{CH3CO2H}[/latex] is needed:

[latex]\text{Volume}=\frac{15.3\times {10}^{-3}\text{mol}}{1.50\text{mol}{\text{L}}^{-1}}=0.0102\text{L}\left(10.2\text{mL}\right)[/latex]

19. There are two equilibria involved: [latex]\begin{array}{l}\text{Mg}{\left(\text{OH}\right)}_{2}\left(s\right)\rightleftharpoons {\text{Mg}}^{\text{2+}}\left(aq\right)+2{\text{OH}}^{-}\left(aq\right){K}_{\text{sp}}=1.5\times {10}^{-11}\\ {\text{CN}}^{-}\left(aq\right)+{\text{H}}_{2}\text{O}\left(l\right)\rightleftharpoons \text{HCN}\left(aq\right)+{\text{OH}}^{-}\left(aq\right)\left({K}_{\text{b}}=\frac{{K}_{\text{w}}}{{K}_{\text{a}}}=\frac{1.0\times {10}^{-14}}{4\times {10}^{-10}}=2.5\times {10}^{-5}\right)\end{array}[/latex] The Mg(NO3)2 dissolves, and [Mg2+] = 0.010 M.

[latex]\ce{[Mg^2+][OH-]^2}[/latex] = Ksp = 1.5 [latex]\times[/latex] 10–11

(0.010)[OH]2 = 1.5 [latex]\times[/latex] 10–11

[OH] = 3.9 [latex]\times[/latex] 10–5M

We need to add enough [latex]\ce{CN-}[/latex] to make [latex]\ce{[OH-]}[/latex] = 3.9 [latex]\times[/latex] 10–5M. Both [latex]\ce{OH-}[/latex] and [latex]\ce{HCN}[/latex] come from [latex]\ce{CN-}[/latex], so [latex]\ce{[OH-]}[/latex] = [latex]\ce{[HCN]}[/latex]:

[latex]\begin{array}{l}\frac{\left[\text{HCN}\right]\left[{\text{OH}}^{-}\right]}{\left[{\text{CN}}^{-}\right]}={K}_{\text{b}}=2\times {10}^{-5}\\ \frac{{\left(3.9\times {10}^{-5}\right)}^{2}}{\left[{\text{CN}}^{-}\right]}=2.5\times {10}^{-5}\end{array}[/latex]

[latex]\ce{[CN-]}[/latex] = 6.1 [latex]\times[/latex] 10–5M

mol [latex]\ce{NaCN}[/latex] = mol [latex]\ce{HCN}[/latex] + mol [latex]\ce{CN-}[/latex] = 3.9 [latex]\times[/latex] 10–5 + 6.1 [latex]\times[/latex] 10–5 = 1.0 [latex]\times[/latex] 10–4

[latex]\text{mass}\left(\text{NaCN}\right)=1.0\times {10}^{-4}\text{mol}\times \frac{49.007\text{g}}{1\text{mol}}=5\times {10}^{-3}\text{g}[/latex]

21. The answers are as follows:

  1. Ksp = [Mg2+][F]2 = (1.21 [latex]\times[/latex] 10–3)(2 [latex]\times[/latex] 1.21 [latex]\times[/latex] 10–3)2 = 7.09 [latex]\times[/latex] 10–9
  2. Ksp = [Mg2+][F]2 = [x][0.100 + 2x]2 = 7.09 [latex]\times[/latex] 10–9
    Assume that 2x is small when compared with 0.100 M.
    0.100x = 7.09 [latex]\times[/latex] 10–9
    x = [MgF2] = 7.09 [latex]\times[/latex] 10–7M
    The value 7.09 [latex]\times[/latex] 10–7M is quite small when compared with 0.100 M, so the assumption is valid.
  3. Determine the concentration of [latex]\ce{Mg^2+}[/latex] and [latex]\ce{F-}[/latex] that will be present in the final volume. Compare the value of the ion product [latex]\ce{[Mg^2+][F-]^2}[/latex] with Ksp. If this value is larger than Ksp, precipitation will occur.
    0.1000 L [latex]\times[/latex] 3.00 [latex]\times[/latex] 10–3M [latex]\ce{Mg(NO3)2}[/latex] = 0.3000 L [latex]\times[/latex] M [latex]\ce{Mg(NO3)2}[/latex]
    M [latex]\ce{Mg(NO3)2}[/latex] = 1.00 [latex]\times[/latex] 10–3M
    0.2000 L [latex]\times[/latex] 2.00 [latex]\times[/latex] 10–3M NaF = 0.3000 L [latex]\times[/latex] M [latex]\ce{NaF}[/latex]
    M [latex]\ce{NaF}[/latex] = 1.33 [latex]\times[/latex] 10–3M
    ion product = (1.00 [latex]\times[/latex] 10–3)(1.33 [latex]\times[/latex] 10–3)2 = 1.77 [latex]\times[/latex] 10–9
    This value is smaller than Ksp, so no precipitation will occur.
  4. [latex]\ce{MgF2}[/latex] is less soluble at 27 °C than at 18 °C. Because added heat acts like an added reagent, when it appears on the product side, the Le Châtelier’s principle states that the equilibrium will shift to the reactants’ side to counter the stress. Consequently, less reagent will dissolve. This situation is found in our case. Therefore, the reaction is exothermic.

23. Effect on amount of solid [latex]\ce{Mg(OH)2}[/latex], [latex]\ce{[Mg^2+]}[/latex], [latex]\ce{[OH-]}[/latex]:

  1. increase, increase, decrease;
  2. increase, decrease, increase;
  3. decrease, increase, decrease;
  4. no effect predicted;
  5. increase, no effect, no effect

25. [latex]\ce{[H2O] > [Ca^2+] > [PO4^3-] > HPO4^2- = [OH-] > [HPO4-]}[/latex]

[/hidden-answer]

License

Icon for the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License

Chemistry Fundamentals Copyright © by Dr. Julie Donnelly, Dr. Nicole Lapeyrouse, and Dr. Matthew Rex is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

Share This Book